Used Claas Xerion for sale (1,113)

Condition: used, Year of construction: 2013, Claas Tucano 430 3D, Quantimeter, grain harvesting machine (Internal No.: 18296) Year of manufacture 2013, first registration 2014, 1811 engine hours, 1069 operating hours, 856 effective hours, AutoContour, Infeed channel, Automatic hitch, Universal wire threshing drum, Threshing drum drive 650-1500 RPM, Walking floor with wooden bearings, Side extensions for walking floor, Intensive walking floor, Standard cleaning system incl. 3D, HD chaff spreader, Fan shroud, Electrically adjustable sieves, Standard upper and lower sieves, Grain tank 8000 liters, Short grain tank outlet pipe, Special Cut straw chopper, M-drive axle, manual gear selection, Access ladder with anti-slip protection, Travel speed 20/25 km/h, Engine Mercedes-Benz OM 926 LA 195 kW/265 hp T4i with air compressor Additional fuel filter Fuel tank 500 liters, Air conditioning incl. refrigerator compartment, CEBIS terminal with color display and CF card drive, Quantimeter for yield measurement, Comfort seat with air suspension, Work lights Plus, Cedpfxe Ahqrxj Algjhd Multi-function handle, Reel automatic, Rear-view mirror, manually adjustable, -Grain harvesting machine!- Tires: 30.5 L-R32 167 A8 8-hole 70 % 440-80 R24 1610 A8 6-hole 60 % Header: V600 Vario header, Rapeseed separator knife, left, Rapeseed kit V600, AutoContour header guidance, Adjustable and foldable straw divider, Reel automatic, Dust box for rapeseed kit with trailer No corn harvesting! Bavaria package for oversized width! Option: other headers possible All-wheel drive axle 14,900.00 EUR plus VAT Rapeseed knife, right 3,900.00 EUR plus VAT

Condition: good (used), operating hours: 8,850 h, axle configuration: 4x4, power: 358 kW (486.74 HP), maximum speed: 40 km/h, front tire size: 900/60 R42, rear tire size: 900/60 R42, gearing type: mechanical, Engine manufacturer: CAT, Performance monitor, Air-suspension seat, Rotating beacon, Chedpfxs Agq N Aj Algod Diesel, Four-wheel / All-wheel steering, GPS system (receiver), ISOBUS, Height-adjustable hitch, Oil return connection (non-pressurized), Three-point linkage external control, Hydraulic control valve external control, Rear PTO external control, 6 work lights at the front, 8 or more work lights at the rear, Upper link, hydraulic (rear), Front linkage (without upper link) First registration: 05.12.2012, On-board computer / Monitor, Air brake, Electronic lift control (ELC), Air-suspension seat, Radio, Manual transmission, Load-dependent additional hydraulic circuit (Power Beyond, Load Sensing), Diesel, Automatic steering system = Further information = Year of manufacture: 2012 Tire size: 900/60 R42 Drive: Wheel Technical condition: good Optical condition: good Please contact Ria Lange for further information.

Condition: used, Year of construction: 2005, Lexion 570 (tracked undercarriage / all-wheel drive) (Int. No.: 12986 oAL) Agricultural machine Year of manufacture: 2005 2,760 engine hours AutoContour Automatic hitch ROTO PLUS variable drive Rotor cover plates, electrically adjustable Straw spreader, universal Grain tank 10,500 liters Long grain tank discharge pipe Special CUT straw chopper CAT engine C12 299 kW (SAE) AC Matic automatic climate control with heating Work lights Cooler bag PCMCIA smart card reader and printer Quantimeter Rearview mirror, electrically adjustable Csdpfe Ahw Uaex Algehd Tires: 800-65 R32 (70%) 500-70 R24 (70%) Options: Cutting table 6.0 m 600C with cart 9,500 EUR plus VAT Cutting table 750V Vario with cart 19,900 EUR plus VAT Folding cutting table 5.4 m 4,500 EUR plus VAT Cutting table 9 m 9,500 EUR plus VAT Rapeseed knife, left 4,900 EUR plus VAT Rapeseed knife, right 2,900 EUR plus VAT Rapeseed box 950 EUR plus VAT Tracked undercarriage 29,000 EUR plus VAT All-wheel drive axle 19,500 EUR plus VAT Financing options available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options both domestically and abroad. Trade-in of other machines is possible.

Condition: used, CLAAS LKS, GPS, and MKS adapter for Jaguar with roller. Options: Used PTO shaft: 350.00 EUR plus VAT. Csdpfxs Ah D Tpj Algshd New PTO shaft: 590.00 EUR plus VAT. PTO shaft for Jaguar 493, 494: 1,250.00 EUR plus VAT. Profile shaft for Jaguar 493-498: 750.00 EUR plus VAT.

Condition: used, Year of construction: 2020, operating hours: 5,334 h, power: 337 kW (458.19 HP), Equipment: air conditioning, all wheel drive, cabin, compressed air brake, front power take-off, XERION 4200 SADDLE TRAC 0010 Used Claas 4200 SADDLE Trac all-wheel drive tractor Chodpo Ah I Hfofx Alged 0020 Cabin, Climatronic, air-suspension seat, 0030 Sun blinds, 0040 Steering wheel adjustment, implement holder, 0050 Radio/MP3/Bluetooth hands-free system, 0060 Side/rear window wipers, 0070 Cebis operator terminal, 0080 Steering system, S10 terminal, 0090 Fuel consumption measurement, 0100 Cabin suspension with mechanical spring and damping, 0110 Work lights, front/rear, 0120 Front three-point linkage 0130 Air brake system, 2-circuit, 0140 EHR rear three-point linkage, category 3N, 0150 Top link, mechanical category 3, 0160 Control valves: 5x double-acting, rear/electric, 0170 Control valves, front: 2x double-acting 0180 Load-Sensing/Power Beyond, 0190 ISOBUS socket, front/rear 0200 Tires: 4 x 800/70 R 38 OM470LA

Condition: used, CLAAS cutter bar, 4 rows, (Internal No.: 11901) with header housing 75 cm suitable for Jaguar 680/659, 800-900 Chedpfxo Ahqmlo Algod Financing options starting from 2% are available for used and new machines. This is only an advertisement and serves for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2020, Claas Lexion 630 Combine Harvester (Int. No. 15929) Year of manufacture: 2020 1590 operating hours 928 drum hours Travel speed: 20 km/h / 25 km/h / 30 km/h Mercedes-Benz OM936 LA - 260 kW / 354 hp (T4) Header drive: 80 kW, constant Intake auger: AUTO CONTOUR Drawbar, automatic Support roller Center idler for shakers, mounted Side idler for shakers, mounted Standard cleaning system, including 3D Fan shroud Upper and lower sieve, TM6 Grain tank, 9,000 liters Long grain tank unloading tube, ø330mm Grain tank unloading: CL Standard distributor - SPECIAL CUT Swath conveyor - Standard distributor Axle: M - 10-hole, 3.5 m Fuel tank: 800 liters Tier 4/M Radio with MP3 function Comfort seat, air-suspended Work lights: LED - Plus Multi-function handle Locking system, standard Spreader plate adjustment, manual - Standard distributor Straw chopper - Counter knife / rubbing floor adjustment, manual Rearview mirror, manually adjustable Chain lubrication for grain tank unloading, automatic Hand wash basin Accessories for overwidth transport, Germany Rotating beacons, 2 pcs TÜV individual inspection Fire extinguisher Axle tires: 800/70 R32 175 A8, 10-hole, 3.5 m Steering axle tires: 500/85 R24 x 275 IMP, 8-hole, Mitas Options: 25 km/h / 30 km/h available at an extra charge Claas header 5.40 m, folding: 26,000.00 EUR plus VAT Vario header 6.60 m: 24,000.00 EUR plus VAT Vario 770 header: 39,000.00 EUR plus VAT Maxflex 770, year of manufacture 2020: 46,000.00 EUR plus VAT Convioflex 770, year of manufacture 2021: 79,000.00 EUR plus VAT Single-axle trailer: 5,900.00 EUR plus VAT Dual-axle trailer: 7,900.00 EUR plus VAT Rapeseed knife, right, with box: 4,900.00 EUR plus VAT Rapeseed knife, left: 3,900.00 EUR plus VAT Tire size 860 / 85 / 32 3.3m: Additional cost 2,900.00 EUR plus VAT Csdpfx Ao Ahxa Rolgohd Straw spreader: 5,900.00 EUR plus VAT All-wheel drive axle: 29,000.00 EUR plus VAT Track system: 29,000.00 EUR plus VAT Bavaria package: 3,400.00 EUR plus VAT This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options in Germany and abroad. Trade-in of other machines is possible.

Condition: used, Year of construction: 2021, Claas Lexion 6700 TT V-Channel All-Wheel Drive, (Int. No.: 14984) Year of manufacture: 2021, 1586 engine hours, 862 operating hours, 678 effective operating hours, 1998 hectares LED lighting for folding attachments, machine-side, Attachment drive XL, two-stage, Cutting table cylinder with 2-way system, V-channel Auto Contour, chain, deflector roller open, automatic drawbar coupling, dust extraction for E/V/HP channel, cutting table brake, APS threshing system for grains and corn, closed threshing drum, threshing drum drive, 2-stage, 170-460 / 330-930 RPM, threshing grate, center walker for shaker, mounted, JET STREAM cleaning system with 3D, upper and lower sieve, standard, grain tank 11000 liters, grain tank spout XL Q330 mm, grain tank unloading 130 l/s, Csdpj Ahxb Ssfx Algohd drive for grain tank unloading 80 l/s - 130 l/s, Special Cut Premium Line with SV, swath spreader, standard distributor, straw chopper drive for standard distributor, premium, triple-axle XL Terra-Trac, access ladder with run-up protection TT, Power Trac steering axle M, adjustable, 25 km/h, engine Mercedes Benz OM470LA 408 HP, fuel consumption measurement, fuel tank 950 liters, engine extraction pump, AC automatic climate control with heating, radio with MP3 function, CEBIS terminal with armrest, camera system, prepared, camera, rear view, terminal, camera, drawbar coupling, Profi CAM, camera, grain tank spout, Profi Cam, yield meter, printer, premium seat Actimo Evolution, air-suspended, work lighting, LED, dust box L incl. operator's seat, CEMOS Automatic Auto Slope, CMOTION multifunctional handle, automatic module, additional module 1+2, tilt sensor, LTE CLAAS communication module, locking system, standard, LED rear lights, retractable, CAN Ethernet Gateway CEG, deflector plate adjustment, manual, standard distributor, straw chopper, concave/beater adjustment, rear-view mirrors, electrically adjustable, chain lubrication for grain tank unloading, automatic, hand wash basin, equipment for left-hand traffic, rotating beacons, three, TÜV individual inspection, license plate holder, front, license plate lighting, warning sign, wide-angle mirror, tool kit, fire extinguisher, Tires: TT tracks XL 635 mm wide, 70% 500-85 R24 x275 IMP 8-hole, Cutting table 770 V 1-axle cart Options: 30 km/h 2,900 EUR plus VAT Documents for other countries available 2,900 EUR plus VAT Cutting table V 930 with cart Additional cost 19,000 EUR plus VAT Cutting table Convio Flex 770 with rape equipment Additional cost 39,000 EUR plus VAT Cutting table MaxFlex 770 Additional cost 9,000 EUR plus VAT Rape knife, right, with box 4,900 EUR plus VAT Rape knife, left 3,900 EUR plus VAT Financing possible from 2% for used and new machines. This is only an advertisement and serves for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options at home and abroad. There is the possibility of taking in other machines.

Condition: used, Year of construction: 2021, CLAAS Lexion 6800 TT 4WD, HP channel engine NEW! (Int-No.: 15223) Year of manufacture: 2021 1892 operating hours, 1280 drum hours, 881 effective hours, LED lighting, folding attachments on the machine side, Header with 2-way system XL, automatic hitch, Dust extraction for E/V/HP channel, Upper linkage hydraulic for HP channel, header brake, APS threshing system for cereals, HP channel hydraulic, AutoContour conveyor belt NEW, closed threshing drum, Threshing drum drive 2-stage 170-460, 330-930 rpm, threshing basket, Center rider for shaker installed, JET STREAM cleaning system incl. 3D, Grain meter incl. over-conveyance volume measurement with CEBIS display, Upper and lower sieve TM6, Grain tank 12500 liters, Grain tank spout XL Q330 mm, grain tank unloading 130 l/s, Radial distributor Special CUT, Swath former - radial distributor, straw chopper drive for radial distributor Premium, A/C Matic automatic climate control with heating, 25 km/h, Mercedes Benz OM 462 PS, fuel consumption measurement Fuel tank 950 liters, Engine drive pump, A/C Matic automatic climate control with heating, Radio with MP3 function, Cooling unit with dust box L, Blinds for side windows, Codpfxo Ahxc Ns Algehd CEBIS terminal with armrest standard, camera system prepared, Rear camera display in the terminal, hitch camera Profi Cam display, grain tank spout camera Profi CAM display, camera screen Profi Cam, terminal preparation, S10 terminal Satcor 15, Yield meter, Printer, CLAAS Remote Service (for extension), Telematics license (for extension), Automatic documentation license (for extension), comfort seat, air-suspended, LED work lights, Steering interface prepared, GPS Pilot Ready, grain tank 12500, 13500, 15000 liters, Claas navigation computer, RTK activation (extension at extra cost), dust box L incl. instructor seat, CEMOS Automatic Auto CROP Flow, CEMOS Automatic Auto Slope, CMOTION multifunction handle, Automodule, Additional module 1, Additional module 2, Tilt sensor, CLAAS communication module, Locking system standard, LED taillights, CAN Ethernet Gateway (CEG), central lubrication system Terra Trac incl. connection straw chopper, discharge direction adjustment automatic, straw chopper - counter knife - friction plate adjustment manual, proportional XL steering valve for GPS Pilot, Laser Pilot, Auto Pilot, Auto Pilot module, Rearview mirror electrically adjustable, chain lubrication for grain tank unloading automatic, hose reel with air compressor hose and compressed air gun, hand washing basin, Rotating beacons three pieces, license plate light, Close-range mirrors, Conveyor belt NEW Engine NEW - damage due to heat exchange of the exhaust gas recirculation (75,000.00 EUR) TT tracks 735 mm Camso, Tires 620-70 R26 Header V930 9.3 m and 2-axle trailer Vehicle documents France, Germany and other countries possible. Option: Reduced price for 4WD 25,000 EUR plus VAT. Belts 630 NEW extra price 4,000 EUR plus VAT. 30 km/h 1,900 EUR plus VAT. Header 930 V 2-axle trailer 9,900 EUR plus VAT. Header 770V extra price 4,900 EUR plus VAT. Financing from 2% possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to take care of financing options at home and abroad. There is the possibility of accepting other machines in part exchange.

Condition: used, Year of construction: 2018, Claas Lexion 630 Central Lubrication System 3D (int. No. 17560) Lexion 630 Year of manufacture: 2018 895 engine hours 455 drum hours 959 hectares 25 km/h Mercedes-Benz OM936 LA - 260 kW / 354 hp (T4) Supplier identification feature for steering axle from CIT LASER PILOT steering system, right and left AUTO PILOT ready Camera - rear, display in the terminal Camera - grain tank spout, PROFI CAM display PROFI CAM camera screen Printer TELEMATICS advanced license - 1 year Comfort seat, air-suspended Work lights LED - Plus CEMOS AUTOMATIC - AUTO SLOPE Multi-function handle Locking system, standard Central lubrication system incl. steering axle, straw chopper Spreader vane adjustment, manual - standard distributor Straw chopper counter blade / friction plate adjustment, manual Proportional XL steering valve for GPS PILOT, LASER PILOT, AUTO PILOT AUTO PILOT module Rearview mirror, manually adjustable Chain lubrication for grain tank emptying, automatic Accessories for overwidth, Germany 2 rotating warning beacons Header drive 80 kW, constant E-channel (S) - AUTO CONTOUR, chain Drawbar coupling, automatic Dust extraction for E/V/HP channel Support roller Deflection roller, open Chodpfo Ahxaqex Algod APS threshing system - cereals (10/7/18) Threshing drum drive - 400.1.050 rpm Center support for shakers, mounted Side support for shakers, mounted Standard cleaning system incl. 3D Fan shroud Upper and lower sieve, standard Grain tank 9,000 liters Grain tank spout long Ø330mm Grain tank emptying XL Standard distributor SPECIAL CUT Swath former - standard distributor Fuel tank 800 liters Tier 4/M TÜV individual inspection TÜV inspection 25 km/h Germany License plate light Fire extinguisher Steering axle adjustable (6-hole) Drive axle M - 10-hole Front tires: 680 / 85 R32 173 A8, 10-hole (80%) Rear tires: 500 / 85 R24 x 205 IMP, 6-hole (80%) Options: Claas 5.40m folding header 26,000.00 EUR plus VAT. Vario 6.60m header 24,000.00 EUR plus VAT. Vario 770 header 39,000.00 EUR plus VAT. Maxflex 770, year 2020 46,000.00 EUR plus VAT. Convioflex 770 year 2021 79,000.00 EUR plus VAT. 1-axle trailer 5,900.00 EUR plus VAT. 2-axle trailer 7,900.00 EUR plus VAT. Rape knife right with box 4,900.00 EUR plus VAT. Rape knife left 3,900.00 EUR plus VAT. Tire 860 / 85 / 32 3.3m, additional price 2,900.00 EUR plus VAT. Straw spreader 5,900.00 EUR plus VAT. All-wheel drive axle 29,000.00 EUR plus VAT. Track drive 29,000.00 EUR plus VAT. Financing from 2% possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to take care of financing options in Germany and abroad. There is the possibility of taking in other machines.

Condition: used, Claas Adapter LKS, MKS, GPS (Int. No. 15977) For Jaguar harvesters Roller Csdpfj Ah D S Dex Algjhd Application: corn header, cutter bars, corn pickers This is solely an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions.

Condition: used, Year of construction: 2021, Claas Lexion 6700 TT V-Channel, (Int. No.: 14984oAL) Year of manufacture 2021, 1586 engine hours, 862 operating hours, 678 effective operating hours, 1998 hectares LED lighting for folding attachments, machine-side, Attachment drive XL, two-stage, Header cylinder with 2-way system, V-channel Auto Contour, Chain, Open deflector roller, Automatic hitch, Dust extraction for E/V/HP channel, Header brake, APS threshing system for grains and corn, Closed threshing drum, Two-stage threshing drum drive 170-460 / 330-930 RPM, Threshing grate, Center rider for shaker mounted, JET STREAM cleaning system with 3D, Upper and lower sieve, standard, Grain tank 11000 liters, Grain tank spout XL Q330 mm, Grain tank unloading rate 130 l/s, Drive for grain tank unloading 80 l/s - 130 l/s, Special Cut Premium Line with SV, Swath deflector, standard distributor, Straw chopper drive for standard distributor Premium, Tri-axle XL Terra-Trac, Access ladder with TT anti-roll protection, Power Trac steering axle M adjustable, 25 km/h, Engine Mercedes Benz OM470LA 408 HP, Fuel consumption measurement, Fuel tank 950 liters, Engine drive pump, AC automatic climate control with heating, Radio with MP3 function, CEBIS terminal with armrest, Camera system prepared, Rear camera display terminal, Trailer hitch camera Profi CAM, Grain tank spout camera Profi Cam, Yield meter, Printer, Premium seat Actimo Evolution air-suspended, Work lights LED, Dust box L incl. operator's seat, CEMOS Automatic Auto Slope, CMOTION multifunction handle, Automodule, Additional module 1+2, Tilt sensor, LTE CLAAS communication module, Locking system, standard, LED rear lights extendable, CAN Ethernet Gateway CEG, Spreader plate adjustment, manual, Standard distributor, Straw chopper, Concave and rubbing floor adjustment, Rearview mirrors, electrically adjustable, Automatic chain lubrication for grain tank unloading, Hand washing basin, Complete equipment for right-hand traffic, Rotating beacons, three units, Individual TÜV inspection, License plate holder, front, License plate light, Warning sign, Wide-angle mirror, Tool set, Fire extinguisher, Tires: TT tracks XL 635 mm wide, 70% 500-85 R24 x275 IMP 8-hole, Chodo Ahxbyepfx Algsd Header 770 V 1-axle chassis Options: All-wheel drive €19,500.00 plus VAT. 30 km/h €2,900.00 plus VAT. Documents for other countries available €2,900.00 plus VAT. Header V 930 with chassis, extra charge €19,000.00 plus VAT. Header Convio Flex 770 with rapeseed kit, extra charge €39,000.00 plus VAT. Header MaxFlex 770, extra charge €9,000.00 plus VAT. Rapeseed knife, right, with box €4,900.00 plus VAT. Rapeseed knife, left €3,900.00 plus VAT. Financing possible from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is also the possibility of taking another machine in part exchange.

Condition: used, Various chopping floors (12776) for Jaguar 680 - 695 / 820 - 880 Grass chute / chopping floors Chopping floors Discharge housing Additional floor from 250.00 EUR plus VAT Tower: 750.00 EUR plus VAT Cedpfx Ae Ah D Hijlgehd This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions.

Condition: used, Year of construction: 2022, Claas Lexion 5400 CEMOS (4WD) (Int. No. 17587) Claas Lexion 5400 Year of manufacture: 2022 30 km/h 796 engine hours 554 drum hours Mercedes-Benz OM 936 LA - 260 kW / 354 hp (Stage V) Chjdps Ahw U Njfx Alged XL gearbox, two-stage Header with 2-way system, M V-channel - AUTO CONTOUR, chain, open deflector roller Hitch, automatic Dust extraction for E/V/HP channel Prepared for CRUISE PILOT Header brake APS threshing system - grain (10/7/18) Threshing drum drive - 330-930 rpm Threshing concavity Center rotor for shakers, mounted JET STREAM cleaning, incl. 3D Upper and lower sieve, standard Grain tank 10,000 liters Grain tank discharge spout Ø 330mm Grain tank unloading 110 l/s Grain tank unloading drive 80 l/s - 130 l/s Fixed discharge spout - grain tank discharge spout L Ø 330mm Standard spreader SPECIAL CUT with straw spreader Swath former - standard spreader Straw chopper drive for standard spreader - Premium Access ladder with driving guard Fuel tank 950 liters Engine-driven pump A/C-Matic automatic climate control with heater Radio with MP3 function Refrigeration unit for dust box L CEBIS terminal with armrest, standard Camera system, prepared Camera cable - grain tank discharge spout L Camera - grain tank discharge spout PROFI CAM display Camera screen PROFI CAM Terminal preparation QUANTIMETER yield measurement CLAAS Remote Service incl. five-year license Comfort seat, air-suspended LED Plus work lights Steering interface prepared Grain tank preparation for GPS Pilot Dust box L incl. operator's seat CEMOS AUTOMATIC - AUTO CROP FLOW CMOTION multifunction handle Steering angle sensor CLAAS communication module (LTE) LED rear lights, retractable Wipers for side windows CAN Ethernet Gateway (CEG) Steering interface activation Spreader plate adjustment, hydraulic - standard spreader Throw direction adjustment, automatic Straw chopper - counter blade / friction plate - adjustment, manual Rearview mirror, electrically adjustable Chain lubrication for grain tank unloading, automatic Hand wash basin Legal equipment for right-hand traffic Rotating beacon, 3 pieces TÜV individual inspection License plate holder front License plate light Warning signs Wheel chocks, 2 pieces Close-range mirror Tool kit - Basic Documentation Fire extinguisher Drive axle L - 10-hole Steering axle M, adjustable Front tires: 800/70 R32 175 A8, 10-hole (95%) Rear tires: 500/85 R24 x 275 IMP, 8-hole (95%) Header VARIO 7.70m Rape knife right and transport box AUTO CONTOUR header guidance - 4 sensors Long crop divider, adjustable and foldable Header mounted on transport wagon PTO shaft 1-axle wagon Options: Rape knife left 3,900 EUR plus VAT 4WD 29,000 EUR plus VAT Financing from 2% possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of taking other machines in part exchange.

Condition: used, Claas PU 300 HD Hydraulic support wheels 492-497 (Internal No. 15581) Year of manufacture 2007 PU 300 HD Pickup with hydraulically adjustable feed auger Mounting kit for gauge wheel, centrally positioned Hydraulically pivoting support wheels 3m working width Option: Oscillating frame with welding parts (Internal No. 15925) 3,900 EUR plus VAT For converting a standard pickup to a contour pickup Financing options available from 2% for used and new machines. Chedpfxo Ahp Ikj Alged This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-ins of other machines are possible.

Condition: used, Year of construction: 1998, Includes cutting unit C540 and rapeseed attachment. Chjdpfxe Agan Ho Algsd

Condition: used, Year of construction: 2022, Claas Direct Disc 600P, double-sided cutter bar, large drum Chedpe Ah Efwofx Alged (Int. No. 15402) Direct cutter bar Working width 5.96 m Year of manufacture 2022 Approx. 250 hectares Paddle roller, height-adjustable Quick coupler - central locking, oscillating frame MAX CUT cutter bar Feed auger with 3-stage speed adjustment Mountable on JAGUAR series 900 and JAGUAR 880 / 870 (Type 500) Premium Line material flow components Conveyor hood kit for DIRECT DISC 600 / 600P Separator knife, right and left Paddle roller lifting mechanism, hydraulically operated The paddle roller distributes barley, wheat, and short chopped material; good feed intake supports the material flow. With a high volume of material, the roller can be hydraulically raised. This supports the material flow and can also be quickly removed. The advantage of the large drum (800) is that barley, wheat, and short grass are effectively processed by the large feed paddle rollers. Hydraulic lifting or removal. Transport cart for Direct Disc 600 / 600P Transport cart, 2-axle - max. 40 km/h Front and rear tire size 260/75-15.3 (10.0/75-15.3) Fenders Running and parking brake Chocks (2 pieces) Lighting Orientation aid for parking the Direct Disc Locking mechanism for support arms, mechanical (tool-free) Financing options starting from 2% are available for used and new machines. This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly take care of financing options both domestically and abroad. There is also the possibility of a trade-in for other machines.

Condition: used, Year of construction: 2005, Claas Lexion 580 TT Agricultural machine, Mercedes engine, 2,998 drum hours (. 17804) AutoContour cutter bar control, Lighting for folding attachments, machine-side, Attachment drive 120 kW, variable 284-425 rpm, Cutter bar cylinder with hydraulic locking and damping, Automatic hitch, Dust extraction for E/V/HP channel, Auto Pilot steering system for steering axle/steering drive axle, Cutter bar brake, Universal threshing drum, Rotor cover plates, Threshing drum drive 2-stage 166-483/395-1150 rpm, Roto Plus variator drive, Separating drum for sawtooth rotor, Standard cleaning system incl. 3D, Fan housing, Upper and lower sieves TM6, Grain tank 10,500 liters, Long grain tank discharge pipe Q330 mm, Straw chopper with distribution fan and separate drive, Drive for mechanical chaff spreader / straw spreader, Drive axle rubber half-track steering system 22 tons, Rubber half-tracks, TT tracks 30% Mercedes engine OM 502LA 316 kW, Fuel consumption measurement, Fuel pre-filter, Special air filter, AC Matic automatic climate control with heating, Light package I, additional work lights, Cooler bag, PCMCIA chip card reader and printer, Yield mapping, Quantimeter yield measurement, Comfort seat with air suspension, Rearview mirror, electrically adjustable, Automatic chain lubrication for grain tank emptying, Accessories for overwidth, Air conditioning compressor NEW 2025 Tires 635 tracks 500-85 R24 Codpfx Ae Ahxf Selgshd Cutter bar 750 C Single-axle trailer Options: Claas cutter bar 750 V, additional price 19,000 EUR plus VAT Rape knife, right-hand, with rape kit 4,900 EUR plus VAT Rape knife, left-hand 3,900 EUR plus VAT All-wheel drive 14,900 EUR plus VAT Financing from 2% possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to take care of financing options in Germany and abroad. There is also the possibility of trade-in of other machines.

Condition: used, Various attachments available for rent (Int. No. 19915FH) We offer various attachments for rent: For combine harvesters + forage harvesters Rental available from 150 hectares. Claas cutter bars from 20 EUR per hectare Claas corn pickers 1,000 EUR per row Claas pick-up heads from 20 EUR per hectare Claas Direct Disc from 30 EUR per hectare Claas Reca-Pick Up for combine harvesters, combine/GPS adapter from 50 EUR per hectare Adapter for forage harvesters - corn pickers from 20 EUR per hectare Financing options available from 2% for used and new machines. Chjdj Ah D Nlspfx Alged This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options, both domestically and internationally. Trade-ins of other machines are possible.

Condition: used, Year of construction: 2015, operating hours: 8,100 h, power: 308 kW (418.76 HP), XERION 4000 SADDLE TRAC 0010 Claas Xerion 4000 Saddle Trac 0020 + Bauer SGT 16,000 slurry tank unit 0030 Front docking arm 0040 Vogelsang pump 12,000 liters 0050 High-performance hydraulics via PTO 0060 Cutter 0070 Preparation for trailed tank 0080 IF 900/60-38 0090 Automatic air conditioning 0100 Radio 0110 Preparation for RTK Claas+Trimble 0120 Schenk rear linkage 0130 LS front + rear Codpfx Alszqp Ivogshd

Condition: used, Year of construction: 2022, Claas Lexion 5400 Cemos, Bavarian Package (All-Wheel Drive) (Int. No. 21728) Claas Lexion 5400 Year of manufacture: 2022 First use: 2025 30 km/h 244 operating hours 392 ha 124 hours of effective working time Mercedes-Benz OM936 LA - 260 kW / 354 hp (Stage V) No registration Header drive M, constant Cutting unit cylinder with 2-way system, M E-channel - Auto Contour, chain, deflector roller open Hitch, automatic Dust extraction for E / V-HP channel APS threshing system - grain (10/7/18) Threshing drum drive 330 - 930 rpm Threshing basket slat Center guide for shakers Jet Stream cleaning incl. 3D Upper and lower sieve, standard Grain tank 10,000 liters Grain tank spout L, Ø330mm Grain tank unloading 110 l/s Grain tank unloading drive 80 l/s - 130 l/s Spout rigid - grain tank spout L Ø330mm Standard distributor Special Cut with SV Swath former - standard distributor Chopper drive for standard distributor - Premium Access ladder with approach protection Fuel tank 950 liters Engine drive pump A/C Matic - automatic climate control with heating Radio with MP3 function CEBIS terminal with armrest, standard CEBIS 1200 terminal Camera system prepared Camera - rear, display in terminal Claas Remote Service incl. five-year license Air-suspended comfort seat LED - Plus work lights Steering interface prepared Grain tank preparation GPS Pilot SAT 900 GNSS receiver - RTK NET activation Activation GPS Pilot - SAT 900 GNSS - receiver Dust box L incl. operator's seat CEMOS Automatic - Auto Slope CMOTION multifunction handle Additional module 1 Tilt sensor Steering angle sensor Claas communication module (LTE) Locking system, standard Rear lights LED, extendable CAN Ethernet Gateway (CEG) GPS Pilot ready Steering interface activation Spreader plate adjustment, manual - standard distributor Chopper - counter blade / friction floor - adjustment, manual Rear view mirror, electrically adjustable Chain lubrication for grain tank unloading, automatic Hand washing container Headlights Rotating beacons, 3 pieces TÜV - individual inspection License plate holder front License plate light Warning signs Wheel chocks, 2 pieces Near-field mirror Fire extinguisher Drive axle L - 10 hole Steering axle M, adjustable Bavarian package Warranty until 07/23/2026 Front tires: 680 / 85 R32 178 A8, 10-hole (95%) Rear tires: 500 / 85 R24 x 275 IMP, 8-hole (95%) Vario - cutter bar 6.80m Rape separation knife right and transport box Auto Contour cutter bar guidance - 4 sensors Grain deflector Short cutter bar with extended outer deflector, adjustable and foldable Cutter bar on transport trolley PTO shaft Transport trolley 6.80m / 6.60m Support for Vario / Cerio / Maxflex 6.80m Chodpfx As Ahw Uwelgjd Drawbar with brake Test unit cutter bar Vario 620 / 680 Options: All-wheel drive 24,900 EUR plus VAT Rape knife left 3,900 EUR plus VAT Wagon 40km/h Extra cost 950 EUR plus VAT Financing options starting from 2% are possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to take care of financing options at home and abroad. There is also the possibility of taking other machines in part exchange.

Condition: used, Year of construction: 2020, Claas Lexion 630 Combine Harvester, All-Wheel Drive (Int. No. 15929) Year of Manufacture: 2020 1590 Operating Hours 928 Drum Hours Travel Speed: 20 km/h / 25 km/h / 30 km/h Mercedes-Benz OM936 LA - 260 kW / 354 hp (T4) Header Drive: 80 kW, constant Feeder Auger: AUTO CONTOUR Hitch, automatic Support Roller Center support for sieves, mounted Side support for sieves, mounted Standard cleaning system, incl. 3D Fan shroud Upper and lower sieves, TM6 Grain tank, 9,000 liters Long grain tank discharge chute, ø330mm Grain tank unloading system CL Standard spreader - SPECIAL CUT Swath former - Standard spreader Drive axle M - 10-hole Fuel tank 800 liters Tier 4/M Radio with MP3 function Comfort seat, air-suspended Work lights, LED - Plus Multi-function handle Locking system, standard Spreader vane adjustment, manual - Standard spreader Straw chopper - Counter blade / rubbing floor adjustment, manual Rearview mirror, manually adjustable Chain lubrication for grain tank unloading, automatic Hand wash basin Accessories for exceeding width limits, Germany Csdpfx Als Ahxbcogjhd Rotating beacon lights, 2 pcs. TÜV individual inspection Fire extinguisher Drive axle tires 800/70 R32 175 A8, 10-hole 3.5m Steering drive axle tires 500/85 R24 x 275 IMP, 8-hole, Mitas Options: 25 km/h / 30 km/h available at extra cost Claas folding header 5.40m 26,000.00 EUR plus VAT Vario header 6.60m 24,000.00 EUR plus VAT Vario header 770 39,000.00 EUR plus VAT Maxflex 770, year of manufacture 2020 46,000.00 EUR plus VAT Convioflex 770 year of manufacture 2021 79,000.00 EUR plus VAT 1-axle trailer 5,900.00 EUR plus VAT 2-axle trailer 7,900.00 EUR plus VAT Rapeseed cutter, right-hand side with box 4,900.00 EUR plus VAT Rapeseed cutter, left-hand side 3,900.00 EUR plus VAT Tires 860 / 85 / 32 3.3m - extra charge 2,900.00 EUR plus VAT Chaff spreader 5,900.00 EUR plus VAT Track system 29,000.00 EUR plus VAT Bavaria package 3,400.00 EUR plus VAT This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options, both domestically and internationally. There is also the possibility of taking other machines in part exchange.

Condition: used, Tow hitch suitable for the Xerion 5000 with the . . Condition: Unused. Chjdpfxe Afidwo Algjd

Condition: used, Year of construction: 2021, CLAAS Lexion 6800 TT, HP channel engine NEW! (Int. No.: 15223) Year of manufacture: 2021 1892 operating hours, 1280 drum hours, 881 effective hours, Lighting: LED, folding attachments machine-side, Header with 2-way system XL, automatic drawbar coupling, Dust extraction for E/V/HP channel, Upper linkage hydraulic for HP channel, header brake, APS threshing system for grains, HP channel hydraulic, AutoContour belt new, closed threshing drum, threshing drum drive 2-stage 170-460, 330-930 rpm, threshing drum grate, Center rider for shakers installed, JET STREAM cleaning system incl. 3D, Grain meter incl. overflow volume measurement with CEBIS display, Upper and lower sieve TM6, Grain tank 12500 liters, Grain tank spout XL Q330 mm, grain tank unloading 130 l/s, Radial distributor Special CUT, Swath former - radial distributor, straw chopper drive for radial distributor Premium, A/C Matic automatic climate control with heating, 25 km/h, Mercedes Benz OM 462 PS, fuel consumption measurement Fuel tank 950 liters, Engine drive pump, A/C Matic automatic climate control with heating, Radio with MP3 function, Cooling unit with dust box L, Roll-up blinds for side windows, CEBIS terminal with standard armrest, camera system prepared, Camera rear display in the terminal, camera drawbar coupling Profi Cam display, camera grain tank spout Profi CAM display, camera display Profi Cam, terminal preparation, S10 terminal Satcor 15, Yield meter, Cjdpfj Ahxctsx Algshd Printer, CLAAS Remote Service (for extension), telematics license (for extension), Automatic documentation license (for extension), comfort seat air-suspended, LED work lights, Steering interface prepared, GPS Pilot Ready grain tank 12500, 13500, 15000 liters, Claas navigation computer, RTK activation (extension, surcharge), dust box L incl. operator's seat, CEMOS Automatic Auto CROP Flow, CEMOS Automatic Auto Slope, CMOTION multi-function handle, Automodule, Additional module 1, Additional module 2, Tilt sensor, CLAAS communication module, Locking system standard, LED rear lights, CAN Ethernet Gateway (CEG), central lubrication system Terra Trac incl. connection straw chopper, discharge direction adjustment automatic, straw chopper - counter blade - friction plate adjustment manual, steering valve proportional XL for GPS Pilot, Laser Pilot, Auto Pilot, Auto Pilot module, Rearview mirror electrically adjustable, chain lubrication for grain tank unloading automatic, hose reel with air compressor hose and compressed air gun, hand washing basin, Rotating beacon, three pieces, license plate light, Near-field mirror, Belt NEW Engine NEW - damage due to heat exchange of the exhaust gas recirculation (EUR 75,000.00) TT tracks 735 mm Camso, Tires 620-70 R26 Header V930 9.3 m and 2-axle trolley Vehicle documents France, Germany and other countries possible. Option: Surcharge for all-wheel drive EUR 25,000.00 plus VAT. Belts 630 NEW, surcharge EUR 4,000.00 plus VAT. 30 km/h EUR 1,900.00 plus VAT. Header 930 V 2-axle trolley EUR 9,900.00 plus VAT. Header 770V, surcharge EUR 4,900.00 plus VAT. Financing possible from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of trade-in of other machines.

Condition: used, Year of construction: 2016, Claas Quadrant 5200 FC T+ST with steering axle (Int. No. 14026) Year of manufacture 2016, first use 2017 17,400 bales Pickup with Power Feeding System (PFS), pickup width 2.35 m, Support wheels for pickup, oscillating and manually foldable, Flywheel brake, hydraulic, FINE CUT cutting rotor with 51 knives (51-26-13-12-0) Hydraulic folding for bale and roll discharge chute, Cedpfx Alj Ahig Rjgshd Roll discharge chute with three rollers, Press flap for moisture sensor, Bale ejector, Twine box, dust-proof and pivoting, single wide-angle universal joint shaft, 6-part, 1 3/8", ball-head hitch K80, wheel cover for 500-55 R20 tires, tandem steering axle, Tires 620-50 R22.5, dual-circuit pneumatic brake system for tandem steering axle, Moisture sensor for determining the residual moisture of the material, Bale discharge sensor, COMMUNICATOR II, Electric bale length adjustment, automatic bale density control, central lubrication system, automatic, electrically controlled, Storage box, dust-proof and water-proof, battery cable, lighting Financing from 2% possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of trade-in of other machines.