Used Claas Haymaking Equipment for sale (1,097)

Condition: used, Year of construction: 2020, Claas Knife Sharpening Machine (Int. No. 13035) Claas Knife Sharpening Machine Aqua Non Stop Year of manufacture: 2020 First use: 2021 Comfoort Ans-C Original packaging Operating manual, Original packaging, Product description (Source: CLAAS): With the AQUA NON STOP COMFORT, knives from almost all manufacturers can be sharpened. The tool-free conversion to sharpen different knife types with a minimal setup time of less than one minute is a particular feature of this fully automatic machine. The knives can be placed precisely in the designated knife holder. Incorrect insertion of the knives is virtually impossible. The templates enable an exact sharpening of the grinding stone along the knife contour. This ensures that the original contour of the knife is maintained and the service life is increased. Optimal cutting quality is the result. Simple operation. Important settings can be made intuitively on the ergonomically arranged control terminal. The machine is switched on and off here, and the number of sharpening cycles is preselected. The sharpening pressure can be adjusted to the conditions by means of a rotary knob and displayed on a pressure gauge. Furthermore, diagnostic functions are also available here for the service technician. High-tech at a high level. The fully automatic machine is controlled by compressed air. The operation of the lifting table and the sharpening motor, as well as the removal of the knives, is carried out pneumatically. Various sensors and pressure switches ensure the sequence control and operational safety. All processes are monitored and can be made available for diagnostic purposes via a sensor query. Fully automatic. The knives are automatically removed. A safety circuit ensures the safe removal of the sharp knives. The knife storage area offers space for the entire set of knives. Clean work. The grinding debris is collected in a chip drawer. Two baffle stages ensure reliable separation of the chips, so that the ambient air is completely free of grinding dust. The chip drawer can be emptied at any time. Tjdpfj Ahicusx Ahaod Subject to changes, errors and prior sale. Options: C09 for Claas knives 245.00 EUR plus VAT. K11 for Krone knives 245.00 EUR plus VAT. U1 for Schuitemaker 245.00 EUR plus VAT. Option: Knife sharpening: On-site knife sharpening is possible with the CLAAS NonSTOP knife sharpening machine. Claas knives and other knives are possible. Per knife, four cycles at 2.00 EUR plus VAT. For blunt knives, an additional 0.50 EUR plus VAT per cycle. Financing from 2% is possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2016, Rolland 340 RAF PU 1.85 m Rake-and-Pick-up Combination (Internal No. 14038) Year of manufacture 2016 3564 bales Twine binding, electric operation, guide wheels on pick-up, fixed, rake-and-pick-up combination, Todpfo Ahia Iex Ahaed standard press chamber rollers, twine binding, single-angle PTO shaft with shear coupling, 6-piece, 1 3/8", tractor hydraulic connection, metric, hydraulic/electronics Roto Feed feeding system, universal drawbar for lower and upper hitch, towing eye D40, input gearbox 540 rpm, CLAAS standard terminal CST, lighting according to STVZO (German Road Traffic Licensing Regulations), Tires: 11.5/80 15.3, 95% remaining The hay is gently fed into the machine by the rake. No rotor, no APS, Soft core on the outside, dense (hard) inside. Options: Bale ejector 560.00 EUR plus VAT. Net binding 2,450.00 EUR plus VAT. Financing options available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is also the possibility of taking in other machines in part exchange.

Condition: used, Year of construction: 1986, Rollant 44 Baler (Int. No. 20989) Claas Baler Type Rollant 44 Year of manufacture 1986 Twine tying 1.20m bale diameter Fixed chamber baler Roller press system PTO drive Mechanically adjustable support wheel Agricultural machine! Tsdpfx As Ahih Sshaod Private sale according to §25a UStG (German VAT Act) Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2014, Claas Pickup 3.0m 300 Pro T (Int. No. 16265) Tedps Af Supofx Ahasd Pickup 300 PRO T Year of manufacture: 2014 3.0m 5 tine rows Quick coupler Hydraulic lifting mechanism for the pick-up auger Mounting kit, 3rd feeler wheel, center Pre-tension spring for the pick-up auger, left and right Pick-up paddles – extension Roller support Feeler wheels can be hydraulically swiveled in Options: Chain sprockets Z 24 / 18 to increase the pick-up auger speed 450 EUR plus VAT Oscillating frame with welded-on parts (. 15925) 3,900 EUR plus VAT For converting a standard pick-up to a contour pick-up Financing from 2% is possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of trading in other machines.

Condition: used, Year of construction: 2023, Claas Quadrant 5300 Evolution FC Tandem LED Moisture sensor, camera, straw press (Int. No. 17047) Year of manufacture: 2023 First use: 2024 14,724 bales 306 operating hours Pickup with POWER FEEDING SYSTEM (PFS), pick-up width 2.35m Gauge wheels for pickup, pivoting (pivot point Ø40mm) Flywheel brake, hydraulic Control line for load-sensing system FINE CUT cutting rotor with 51 knives (51-26-25-13-0) Harvest equipment Plus Folding mechanism, hydraulic, for bale/roll chute Roll chute with 3 rollers Press flap for moisture sensor Bale ejector Twine box, dustproof and swiveling Single-width angle universal joint shaft, 6-part, 1 3/8" Hydraulics / Electronics Universal drawbar for lower hitch Ball head coupling K80, MR Shear bolt coupling Tandem steering axle Two-line pneumatic brake for tandem steering axle Work lights LED High End Moisture sensor for determining residual moisture content of the material Bale discharge sensor PROFI CAM camera TONI - TELEMATICS ON IMPLEMENT Teds Ahigxspfx Ahaed Screen for PROFI CAM ISOBUS cable without terminal Bale length adjustment, electric Press pressure control, automatic Central lubrication system, automatic, electrically controlled Statutory equipment MR with braking system Toolbox 74 liters incl. accessories Technical documentation (German) Fire extinguisher 6kg Speed stickers 60km/h Lighting Wheel cover for tires 620/50 R22.5 Tires 620/50 R22.5 Post-harvest inspection carried out! Only straw pressed! Options: Terminal 890 EUR plus VAT Weighing system 6,900 EUR plus VAT Financing from 2% possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is also the possibility of a trade-in for other machines.

Condition: used, Year of construction: 2009, Orbis 600 AC (Int. No. 13632) Year of manufacture: 2009 First use: 2010 Quick coupler, Pro, Working width: 6.0 m, Swinging frame, Storage maize auger, Quick coupler Options: Lighting system, warning signs: 450 EUR plus VAT. Integrated chassis: 4,900 EUR plus VAT. Autopilot: 1,950 EUR plus VAT. AutoContour: 2,400 EUR plus VAT. Todpfxj Af Stvo Ahaod Knife set upgraded to the latest standard / 2023 series: 2,900 EUR plus VAT. Financing available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2004, CLAAS Liner 1550 TWIN Profil, (Int. No. 13395) Year of manufacture 2004 6.8 / 7.5 m working width, single wide-angle articulated shaft Lower link attachment, Lighting, Steering axle, Trailing device, Transport width 3.0 m, two rotors, 11 tine arms, Tires: 185 R14 300/65 12 8x 16x650/8 Tjdpfe Ahh H Asx Ahasd Side and single-row swathing possible. 1 and 2 row swath deposition, Also available on customer order with 9.0% down payment. Rotors were upgraded to the latest standard in 2017. Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options in Germany and abroad. Trade-in of other machines is possible.

Condition: used, Year of construction: 2021, Guide wheels, pick-up, oscillating Tedpfo Ahii Tex Ahasd Bale transfer guide Bale stacker Shear blade Double roller presser Input gearbox, 1000 rpm Isobus cable, without terminal Double wrapping arm, 750 mm

Condition: used, Year of construction: 2008, Press and wrapping combination - 16-knife cutting unit - PTO shaft with cam-operated friction clutch and freewheel - Pickup width 2.10 m - Claas Roto Cut cutting rotor with 4 helically arranged tine rows - Maximum Pressure System (MPS II) - Rear flap with hydraulic locking - Press roller bearings, greaseable with three central grease filters - Bale dimensions: Width: 1.20 m, Diameter: 1.25 m - Rollatex net wrapping - Claas Communicator operator terminal Tedpfxj Agh Rze Ahaed - Double wrapping arm - Film box for 10 spare rolls - Tires: 560/45-22.5 8 PR

Condition: new, Year of construction: 2026, Fixed-chamber round baler with a press chamber diameter of 1.25 m Press chamber width 1.20 m / standard equipment: Pickup: Pickup width 2.10 m / 4 tine rows, cam-controlled Tast wheels with 16x6.5-8 tires / feed augers on both sides ROTO CUT cutting rotor: Cutting rotor with four helically arranged tine rows 14 knives, individually protected against foreign objects Press chamber: 16 profiled steel rollers / tailgate with hydraulic locking Press roller bearings permanently lubricated Permanent chain lubrication Hydraulic requirements: 1 x single-acting and 1 x double-acting Optional equipment: + PR_B02/0050 Pickup with roller presser, pickup width 2.10 m + PR_B06/0010 Tast wheels for pickup, pivoting (pivot point Ø 30 mm) + PR_N10/0030 Tires + PR_C03/0030 Blind knives Tsdpfx Ahj Agamwsaed + PR_C24/0020 ROTO REVERSE, hydraulic rotor reversing

Condition: used, Year of construction: 2010, Pickup PU 300 HD L PRO with roller support (internal no. 16263) 3.00 m Roller support Hydraulic lifting and lowering of the feed auger 3rd guide wheel, centered Hydraulically retractable support wheel Protective cover Quick-release coupling 4 rows of tines Tjdpfxo Af Svuj Ahaed PTO shaft on top, side Options: Oscillating frame with welded-on parts (. 15925) 3,900 EUR plus VAT For converting a standard pickup into a contour pickup Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options in Germany and abroad. Trade-in of other machines is possible.

Condition: used, Year of construction: 2006, CLAAS Xerion 3300 Saddle Trac with SGT slurry spreader, 15,000 liters (Suitable for maize with 2.25 m track width) (Front hydraulics optional) (Int. No.: 13149) Performance hydraulics 8,715 operating hours, Year of manufacture: 2006, Drawbar, pivoting, Automatic hitch, Rear three-point linkage Cat. 3, pivoting, 4 additional control valves with breakaway couplings at the rear and front, Load-sensing connections at the rear and front Coupling connections at the front, pressure-free return, front Oscillating axle lock, 50 km/h ZF transmission, Engine CAT C9 K, 6 cylinders, fuel consumption measurement, XERION SADDLE TRAC, Side window wipers including sun visors on the right and left, Rear window wiper, Cab with heating and automatic climate control, cab suspension with mechanical spring and damping, Lighting package, Comfort seat, air-sprung and heated, ISOBUS socket at the rear, Rear-view mirrors, electrically adjustable with mirror heating, Radar sensor for universal slip measurement, Two rotating beacons, Equipment for track width over 3.0 m to 3.3 m, two-circuit air brake system, stainless steel exhaust pipe Tires: 800/65 R32 Michelin MegaXBib 80% Stainless steel exhaust pipe, 15,000 liter SGT Superstructure mounted on four Walterscheid ball couplings, 8" suction hose, raise/lower 116° 6,000 l Vogelsang positive displacement pump, Operation via Müller ISOBUS terminal, reversing camera, Tank superstructure prepared for supports, Suction hose rotatable to the right and left, Gearbox, two at the front for slurry pump, foreign object separation, Additional 6" suction nozzle at the front, Automatic shut-off, Stepless flow rate control, Rotating beacon Without supports Slurry application in maize rows possible Financing available from 2% for used and new machines. Option: Müller parallel driving system Basic terminal EUR 2,400 plus VAT. Maintenance wheels NEW 520-85 R42, track 2.25, BKT EUR 7,950 plus VAT. Maintenance wheels NEW 480-80 R42, track 2.25, BKT EUR 7,850 plus VAT. Todpfe Ag I Scjx Ahajd Front hydraulics EUR 5,900 plus VAT. Power increase EUR 1,450 plus VAT. Financing available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to take care of financing options in Germany and abroad. There is the possibility of a trade-in of other machines.

Condition: new, Swing frame for Claas Pickup 493 - 498 series, Contour model (Int. No. 15925) for Claas Pickup 493 - 498 series with weld-on parts for converting a standard pickup to a Contour model parts are supplied loose self-assembly required, approx. 4 hours This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options, both domestically and internationally. We also offer the possibility of taking other machines in part exchange. Tjdpfx Ahe Af Swksaed

Condition: used, Year of construction: 2013, -Working width: 8.30 m Tedpfx Ahj Aghyqoasd -Transport width: 2.95 m -Transport height: 4 m

Condition: used, Year of construction: 2022, Claas Quadrant 5200 Evolution FC Tandem - Year of manufacture: 2022 - Gauge wheels for pickup, pivoting and manually foldable (diameter 40 mm) - FINE CUT cutting rotor with 51 knives (51-26-25-13-0) - Harvest equipment Plus - Roller chute with 3 rollers and weighing system - Single-width wide-angle PTO shaft, 6-piece, 1 3/8" - Universal drawbar for bottom hitch - Ball hitch K80, MR - Tandem steering axle - Tires 620/50 R22.5 - Two-line pneumatic braking system for tandem steering axle 22.5" - Work lights, LED High End - Moisture sensor for determining residual moisture content of the material - PROFI CAM camera - Left/right indicator incl. knotter monitoring - Folding function via terminal for bale ramp with weighing system Tedpo Agiaiefx Ahajd - Screen for PROFI CAM - CEMIS 700 - ISOBUS cable, in addition to terminal - Storage box, dustproof and waterproof

Condition: used, Year of construction: 2026, Claas Arion 660 CMATIC, Demonstration Machine (Int. No. 18616) Claas Arion 660 CMATIC Year of manufacture: 2026 15 operating hours 50 km/h 6-cylinder DPS engine 205 hp / 151 kW Night Edition leather steering wheel Night Edition design - stickers + emblem Night Edition color scheme, hood CMATIC transmission, continuously variable CMATIC incl. engine speed memory plus CSM, CEBIS PTO 540 / 540 ECO RPM PTO stub shaft 6-part, 1"3/8 Hydraulic system Load-Sensing 150 l/min 4 + 2 control valves, electro-hydraulic proportional (CEBIS) Power-Beyond, LS connections without flat face coupler Fuel tank 370 liters Electronic reversing shuttle (Revershift) Air brake system (2-circuit) Automatic trailer brake LED Premium work lights LED Premium work lighting LED driving lights, 4 pieces LED work lights, 2 pieces on the hood LED driver's auxiliary lights, 2 pieces on the A-pillar LED rear lights, standard with warning triangle Roof with sunroof opening to the rear, Night Edition Tsdpfx Ao Ahdp Njhasd Comfort fabric seat, semi-active, longitudinally / horizontally sprung Radio with Apple CarPlay, Android Auto and touchscreen Front axle PROACTIV with wet disc brakes Electronic battery main switch Exhaust shield, standard Claas front lift 4.0t incl. vibration damping 2 connection sockets at the front / 1 pressureless return line External control for front lift and front control valve Front PTO 1,000 RPM Reinforcement frame, transmission, engine side panels for front loader Electronic lift control (EHR) Rear lift, increased lifting force Lower links Cat. 3 with catch hook Lower link side stabilizers, automatic Hydraulic top link, catch hook Cat. 3 Trailer hitch with insert for drawbar Drawbar with ball hitch for standard trailer hitch Drawbar, automatic with 38mm bolt diameter Ball hitch Cat 3/2 4-pillar cabin with 4-point suspension CEBIS control terminal with touch function Electropilot with reversing function Passenger seat with safety belt Rear window for 4-pillar cabin Rear window wiper Electric mirrors incl. wide-angle mirror 2 terminal rails, headliner and A-pillar Removable storage box, left Additional interface sockets CEMOS Demo Version 400h ISOBUS activation for CEBIS ISOBUS preparation at the rear Activation Task Control Basic, tractor side Profi Cam rear camera in CEBIS incl. 1 CPC Incab camera connection Steering station prepared Connect package - Professional Machine Connect license 5 years CEMIS 1200 terminal Activation TC-GEO-CEMIS and TS-SC-CEMIS 1200 terminal Activation variable rate application (VRA) SAT 900 activation RTK NET (including 5 years of data) Auto Pilot / GPS Pilot ready Activation for GPS Pilot - Sat 900 GNSS receiver Claas communication module Front wheel fenders, pivoting, 620mm Fender extension 2.55m overall width, wheel diameter >1.93m Tires: 600/65 R28 Vredestein Traxion XXL / Solid rim 650/65 R42 Vredestein Traxion 65 / Solid rim Financing possible from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of taking in other machines in part exchange.

Condition: used, Year of construction: 2015, Claas Orbis 900 AC 3T, suitable for models 494-498 (Internal No. 11234) Year of manufacture: 2015 Working width: 9.0 m 12 rows AutoContour (slope compensation) automatic steering, autopilot central control panel Quick-release coupling 3T integrated chassis Tjdpfx Ahe Af Srfjaod Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2013, Type: VARIANT 380 RC, chassis number: 75204320 The drive shaft of the pick-up is broken. Tsdpfxo Agbpxe Ahaed

Condition: new, Year of construction: 2026, Equipment: air conditioning, cabin, AXOS 2.105 CLAAS Tractor - Day registration - TG_B02 Front weight carrier 110 kg TG_B10 Front linkage bracket with E-PILOT S TG_I04 1 engine speed memory TG_I16 SMART STOP TG_J02 Control of the rear linkage, electronic TG_J04 Lower link reinforced, pick-up hitch Cat. 2, fixed TG_J06 Side stabilizers on the lower link, inside, mechanical TG_J08 Upper link with pick-up hitch Cat. 2 TG_J10 Towing hitch, long, with adjustment rails TG_J12 Rear linkage 3.2 t, electronic TG_J16 Towing coupling, automatic TG_J20 Lifting struts, mechanically adjustable TG_J22 External operation of the rear linkage, electronic TG_K02 Open hydraulic circuit, 87 l/min, 3 pumps TG_K04 3 control valves, mechanical, single/double-acting with flow regulator TG_N00 30/15 speed TWINSHIFT, incl. REVERSHIFT with super creeper gear Tsdpfx Ao Ahdw Eohaed TG_N02 Super creeper gear (0.5 km/h) TG_N04 Maximum speed 40 km/h ECO TG_N06 Front axle, standard with all-wheel drive TG_N10 PTO shaft 540/1,000 rpm TG_N22 Front fender, pivoting, 410 mm TG_N30 PTO engagement rear, electronic TG_N42 All-wheel drive with lamella clutch TG_N46 Differential lock with lamella clutch TG_P02 103 hp max. power, 98 hp homologated rated power, ECE R 120 TG_P14 Exhaust on the cab pillar, left TG_P18 Fuel tank 105 liters incl. protection with urea tank 10 liters TG_Q02 BUSINESS cabin TG_Q04 Standard roof TG_Q08 Rear window wiper incl. washer system TG_Q10 Windshield, opening TG_Q12 Interior mirror TG_Q14 Exterior mirrors, manually foldable and extendable TG_Q16 Windshield wiper front TG_Q18 Fender extension 200 mm TG_Q24 Toolbox TG_Q40 Driver's working light TG_Q42 Halogen work lights, 2 x front & 2 x rear TG_Q56 Main headlights, halogen TG_R00 Color, CLAAS Green TG_R04 Driver's seat, fabric, air-suspended TG_R06 Passenger seat, incl. seat belt TG_R10 Radio DAB+ with MP3 function and external microphone TG_R18 Filter TG_R22 Steering column, tilt and height adjustable with steering wheel, standard TG_R24 Sun visor, front TG_S10 License plate holder, front TG_S12 Wheel chock, 1 piece TG_R08 Air conditioning TG_SBL ELECTROPILOT S equipment package

Condition: used, Year of construction: 2009, Errors and prior sale excepted. Claas transport trailer, year of manufacture 2009, for Vario cutterbar 7.50m. Tjdpfx Ahe Aga Dbeaod

Condition: used, Magnetic coupling for Variant 180/280RC (Int. No. 11221) Magnetic coupling for Claas Variant 180/280 RC, 450.00 EUR plus VAT. Financing options starting from 2% are available for used and new machines. Tjdpfx Ahe Af Uqmoasd This is merely an advertisement intended for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We would be happy to assist you with financing options, both domestically and internationally. Trade-ins of other machines are possible.

Condition: used, Year of construction: 2014, Errors and prior sales excepted. CLAAS Crop Sensor ISARIA: Year of manufacture 2014, without terminal, ISO-BUS, 2 optical sensors, including front weight. Tjdj Aga Uwspfx Ahaed

Condition: used, Year of construction: 2019, Claas 2-axle transport trailer, year of manufacture 2020, serial number 52106984, transport box, rapeseed harvesting equipment, 2 hydraulic side knives, 1 laser pilot on the left, 2 short cutter bars. Tedpfxe Ahgzio Ahaod

Condition: used, Year of construction: 2024, Pickup width 2.35 m with roller bed Roto Cut cutting rotor with hydraulically lowerable cutting floor Silage equipment Tjdps Aghlkofx Ahajd 17 knives and stubble knives Net wrapping Air brake Tires: 560/45-22.5 Cemis 700 operator terminal

Condition: excellent (used), working width: 2,100 mm, Year of manufacture: 2025 Tsdps Agagmofx Ahajd Technical condition: very good Visual appearance: very good Serial number: J2200071 Bale count: 528 Please contact Afdeling Verkoop for more information