Used balers & baling equipment for sale (212)

Condition: good (used), operating hours: 20,500 h, working width: 2,200 mm, Number of bales: 20500 Bale ejector: yes Bale ramp: yes Operating hours: 20500 Binding type: net wrap Compressed air: yes Twine binding: yes Knives: 13 Net wrap: yes Pickup width: 2.2 Pickup support wheel: yes Pickup, hydraulic: yes Codpoz Nlzujfx Afwori Tire size: 500/60R22.5 Roller press: yes Rotocut: yes Cutting unit: yes Wide-angle PTO shaft: yes Type: 990, Variable bale chamber, Other: Rotor, cutting unit with 13 knives, guide wheels, number of axles: 1, chassis number: 1CC0990PCEX150192, first use: 06/01/15, bale size (m): 0.60 to 1.85, number of bales: 10972, rear tires: 500/60R22.5, rear tire condition %: 70, speed (km/h): 50, compressed air, cutting device, crop pickup, pickup width (m): 2.2, central lubrication, discharge: rear, bale ejector, net wrap, side conveyor, electronic monitoring, lighting, wide-angle PTO shaft Tires (rear): 500/60R22.5, tire condition (rear): 70%, speed: 50 km/h, number of knives: 13, bale size (width): 0.60 to 1.85 m, bale ejector, net wrap, pickup, roller press, support foot/wheel, wide-angle PTO shaft = Further information = Year of manufacture: 2014 Technical condition: good Visual condition: good Bale count: 10972 Please contact Ria Lange for further information.

Condition: used, Year of construction: 2011, operating hours: 26,356 h, VARIANT 385 RC Code Ah I E Tepfx Afwjri (0010) Used CLAAS round baler (0020) Roto Cut cutting rotor (0030) Top linkage (0040) Terminal (0060) Tire size: 500/50-17 (0070) Support wheels for the pick-up (0080) Lower holding device (0100) Cutting system (0110) Number of knives: 14 (0120) Net wrapping (0130) Bale ejector

Condition: good (used), working width: 2,000 mm, Round bale press Rotocut Number of knives: 25 Csdpfxe Agq Nmo Afweri Pick-up 32,550 pressed bales E-Link control panel 1 roll in working position + 2 spare rolls Incl. PTO shaft Tires (h): 500/55-20, tire condition (h): 70%, speed: 40 km/h, bale dimensions (max. diameter / height): 160 cm, number of knives: 25, bale dimensions (width): 123 cm, bale dimensions (min. diameter / height): 90 cm, bale ejector, on-board computer / monitor, air brake, net binding, support leg / wheel, cutting unit, wide-angle PTO shaft, central lubrication, variable chamber, single-axle, top hitch (eye), grass collection device / silage equipment = Further information = Year of manufacture: 2007 Technical condition: good Optical condition: good Bale count: 32,550 Please contact Ria Lange for further information.

Condition: good (used), working width: 2,000 mm, Bale size: 1.25 m Bale ramp 14 knives Pickup width: 2 m Hydraulic pickup Soft core Number of knives: 14, bale size (width): 125 cm, bale ejector, net wrap, pickup, roller presser, cutting unit, wide-angle universal joint, single-axle machine Crodpfx Afsz Nr Stewsi = Further information = Year of manufacture: 2014 Technical condition: good Optical condition: good Please contact Ria Lange for further information.

Condition: used, Year of construction: 2015, Kuhn VB 2160 Operator terminal VT 50 incl. ISOBUS connection Rotor with 14 knives new endless belts, 2024 Bale ramp at the rear Csdpfx Afj Ahh Etewjri

Condition: good (used), Speed: 40 km/h, Bale size (width): 80 cm, Bale size (min. diameter/height): 80 cm, Onboard computer/monitor, Air brake system, Cedpfxoz Nmare Afwsri Pickup, Fixed chamber, Cleaning system Bale size (width): 80 cm, bale size (length): 250 cm, bale size (min. diameter/height): 80 cm, twine tying, knotter cleaning, pickup, support leg/wheel, tandem axle, wide-angle universal joint = Further information = Year of manufacture: 1998 Technical condition: good Optical condition: good Please contact Ria Lange for further information.

Condition: good (used), working width: 2,000 mm, with Focus operator terminal, PTO shaft Tire size (h): 19.0/45-17, bale dimensions (max. diameter / height): 125 cm, bale ejector, air brake, net wrap, pickup, wide-angle PTO shaft, fixed chamber, single-axle, top linkage (eye). Credpfxez Nr R Ne Afwji = Further information = Year of manufacture: 2012 Technical condition: good Optical condition: good Bale count: 26,800 Please contact Ria Lange for further information.

Condition: good (used), without control element Pick-up, tandem axle = More information = Year of manufacture: 2007 Technical condition: good Optical condition: good Please contact Ria Lange for further information. Cjdpfx Afez Nmmxswjri

Condition: good (used), PU, driveshaft Pickup, support leg/wheel, tandem axle = Further information = Year of manufacture: 2004 Technical condition: good Optical condition: good Bale count: 16,000 Please contact Ria Lange for further information. Crodpfs Agfaijx Afwoi

Condition: good (used), working width: 2,400 mm, Net wrapping Retractable bale ejector Filling level indicator Press roller bearing (grease fitting) 17 knives Tow hitch, rotatable, 35mm Theft protection Tow hitch Safety chain for tow hitch E-Link Pro control unit Grey Body PickUp, 2.40 m Adjustable roller press PickUp, with trailing guide wheels Axle with air brake Tire size: 500/55-20 33,497 pressed bales Tire size (h): 500/55R20, Number of knives: 17, Bale ejector, Air brake, Net wrapping, PickUp, Single-axle machine = Further information = Cedpfxjz Nlunj Afwjri Technical condition: good Optical condition: good Bale count: 33,497 Please contact Ria Lange for further information.

Condition: good (used), working width: 2,100 mm, Tandem axle, K80 hitch, roller support, support leg, air brake, support wheels, twine binding, 40 km/h Tires (h): 600/50-22.5, bale size (width): 120 cm, bale size (length): 300 cm, bale size (min. diameter/height): 70 cm, ball hitch (K80), onboard computer/monitor, air brake, twine binding, pickup, roller support, support leg/wheel, cutting unit, tandem axle, wide-angle universal joint, top hitch (eye), = Further information = Year of manufacture: 2007 Codpfjz Nmk Rjx Afwjri Intended use: Agriculture Technical condition: good Optical condition: good Bale count: 65,000 Please contact Ria Lange for further information.

Condition: good (used), working width: 2,200 mm, Number of bales: 957 Crodpfx Aez Nr Hqofwei Bale size D: 1.25 Number of bales (compressed bales): 957 Pickup width: 2.2 m Number of knives: 14, net wrap, wide-angle PTO shaft, single-axle = Further information = Year of manufacture: 2022 Technical condition: good Optical condition: good Bale count: 957 Please contact Ria Lange for further information.

Condition: good (used), working width: 2,200 mm, Operator terminal Bale dimensions (width): 120 cm, bale dimensions (length): 250 cm, bale dimensions (min. diameter/height): 85 cm, yarn binding, pick-up, single-axle = Further information = Csdpfxjz Nmz Nj Afweri Year of manufacture: 1992 Technical condition: good Optical condition: good Please contact Ria Lange for further information.

Condition: good (used), working width: 2,250 mm, Lower K80 hitch, universal joint shaft, hydraulic support leg, control unit, knotter cleaning, tandem axle, air brake Codpoz Nmlnofx Afwori Tires (h): 560/45R22.5, speed: 40 km/h, bale size (width): 70 cm, bale size (length): 90 cm, bale size (min. diameter/height): 120 cm, ball hitch (K80), bale ejector, onboard computer/monitor, air brake, twine binding, knotter cleaning, pickup, roller press, support leg/wheel, tandem axle, wide-angle universal joint shaft, fixed chamber, cleaning device, lower hitch (eye) = Further information = Year of manufacture: 2008 Technical condition: good Optical condition: good Bale count: 55,000 Please contact Ria Lange for further information.

Condition: used, Year of construction: 2013, Krone Comprima V 210 XC variable round baler Type: V 210 XC Year of manufacture: 2013 Serial number: 21V871 423 Bale count: 21,720 - 17-knife cutting unit - Non-steered pick-up - Roller presser - Air brake system - Top linkage/drawbar - Tires: 500/55-20 - Oil lubrication for chains - Operating manual Codpfxo Agn Eho Afwsri - Control panel - TÜV inspection report

Condition: good (used), working width: 2,000 mm, Power requirement PTO min. 59 kW Bale length from-to 0.7-2.4 m Bale width from-to 0.8 m Bale height 0.5 m Pickup width 2 m Pickup, support leg/wheel, single-axle Credpfx Afe Aftv Djwji = Further information = Year of manufacture: 1996 Technical condition: good Visual condition: good Please contact Ria Lange for further information.

Condition: good (used), working width: 2,200 mm, Drawbar hitch, PTO shaft, support wheels, lighting, Twine binding, knotter blower, PU 2.20m Tires (h): 600/50-20, bale dimensions (width): 120 cm, bale dimensions (length): 100 cm, bale dimensions (min. diameter/height): 85 cm, air brake, twine binding, knotter cleaning, pick-up, support leg/wheel, wide-angle universal joint, fixed chamber, single-axle, top-mounted hitch (eye). Crsdpfxsz Nmkws Afwoi = Further information = Year of manufacture: 1996 Technical condition: good Visual condition: good Please contact Ria Lange for further information.

Condition: used, Year of construction: 2004, Hydr. reversing Bale size 0.8 - 180 m / Cjdpfxorxta Ee Afwjri

Condition: good (used), operating hours: 1,044 h, working width: 2,100 mm, Wide-angle articulated shaft Crodpfx Afez Nr D Nowoi Pickup with roller presser, pickup width 2.1 m Rotocut Concealed cutter Knives Communicator II Bale dimensions: 90-180 Tires (h): 500/50 R17, bale ejector, net wrapping, pickup, roller presser, support leg/wheel, cutting unit, camera/video monitoring, variable chamber, single-axle, ISOBUS = Further information = Year of manufacture: 2014 Technical condition: good Visual condition: good Bale count: 52168 Please contact Ria Lange for more information.

Condition: good (used), Krone BigPack 127 (VFS) MultiCut large bale press Bale dimensions: 1.20 x 0.70 x 1.00-2.50 Pickup width: 2000 mm - Roller-type pickup with hydraulic lift - Pickup roller presser for 2.0 m pickup - Single axle - Tires 800/40 R26.5 Cjdpfoz Nmlbox Afwsri - Bale ejector - Twine tying - Knotter cleaning, 6 knotters - Rotocut - Wide-angle universal joint shaft - Automatic central lubrication Tire size (h): 800/40R26.5, Bale dimension (width): 120 cm, Bale dimension (length): 100 cm, Bale dimension (min. diameter / height): 70 cm, Twine tying, Pickup, Roller presser, Wide-angle universal joint shaft, Central lubrication, Single axle = Further information = Year of manufacture: 2003 Technical condition: good Optical condition: good Please contact Ria Lange for further information.

Condition: good (used), working width: 2,100 mm, Tandem axle, roller support, K80, central lubrication, DL brake, support wheels, driveshaft Tires (h): 550/50-17, bale size (width): 70 cm, ball hitch (K80), bale ejector, air brake, net wrapping, pick-up, roller support, support leg/wheel, tandem axle, wide-angle driveshaft, central lubrication, fixed chamber, top linkage (eye). = Further information = Year of manufacture: 2012 Technical condition: good Optical condition: good Bale count: 80,000 Cjdpfx Aoz Nmddjfwjri Please contact Ria Lange for further information.

Condition: good (used), working width: 2,200 mm, Top linkage, PTO, 25 knives, ISOBUS, net wrapping, roller press, oscillating support wheels Speed: 40 km/h, bale dimensions (max. diameter / height): 165 cm, number of knives: 25, bale dimensions (width): 120 cm, bale dimensions (min. diameter / height): 100 cm, bale ejector, air brake, net wrapping, pick-up, roller press, support foot / wheel, cutting unit, wide-angle PTO shaft, single-axle, ISOBUS, top linkage (eye) = Further information = Year of manufacture: 2018 Technical condition: good Cedpfxez Nkvwj Afweri Optical condition: good Bale count: 22,000 Please contact Ria Lange for further information.

Condition: used, Year of construction: 2020, John Deere V461 M variable round bale press Year of manufacture: 2020, Model year 2020 Serial number: 1CCV461NLLM201_216 Bale count: 11,920 - 6 press belts - Steered pick-up, 5 rows Crodpfxe Ah Epnj Afwei - Roller press - 13-knife cutter unit - Central lubrication system with cartridge - Tires: 500/50-17 Vredestein flotation tires - Unbraked axle - Top-mounted hitch - Heavy-duty drawbar - Long, adjustable support leg - Oil lubrication for chains - Bale discharge/bale ramp - Isobus, WITHOUT monitor - Operating manual

Condition: good (used), in good condition, winter maintenance check (oils, belts, etc.) performed Crjdpfx Aez Nn E Nefwji air brake system, pick-up, cutter bar, tandem axle, wide-angle universal joint = Further information = Year of manufacture: 2019 Technical condition: good Visual condition: good Bale count: 35,500 Please contact Ria Lange for further information.

Condition: good (used), working width: 2,000 mm, Pickup width: 2.00 m, bale diameter: 0.6-1.50 m, net wrapping. PTO-driven baler with support wheels. Bale dimensions (max. diameter/height): 150 cm, bale dimensions (width): 120 cm, bale dimensions (min. diameter/height): 60 cm, net wrapping, pickup, support foot/wheel, wide-angle PTO shaft, variable chamber, single-axle, top linkage (eye). = Further information = Year of manufacture: 2003 Technical condition: good Codpfx Afjz Nr Eaewori Optical condition: good Bale count: 36000 Please contact Ria Lange for further information.