Used Claas Elios for sale (1,116)

Condition: used, Year of construction: 2025, Claas Elios 210 Platform Classic - Year of manufacture: 2025 - Demo machine - Standard tractor with a 4-cylinder FPT engine with a maximum of 75 hp, maximum 309 Nm (ECE R 120), and 3.4 l displacement - Fuel tank, maximum 90 l - Mechanical transmission with a maximum of 24 forward + 24 reverse gears + a maximum of two power shift stages (TWINSHIFT) - Maximum speed: 40 km/h + minimum 0.5 km/h - Mechanical or electronic reversing shuttle (REVERSHIFT) - Hydraulic output, maximum 85 l/min, and lifting capacity, maximum 3,240 kg - Hydraulic system with a maximum of 3 mechanical control units and a maximum of 4 hydraulic couplings at the front - Height from 1.92 m and tire diameter, maximum 1.50 m - 24/24 gears, 40 km/h, mechanical range shift with creep speed (500 m/h) - Rear PTO engagement, mechanical - Driver's seat, mechanical Drive + Engine - 24/24 gears, mechanical reversing shuttle and mechanical range shift as standard - Maximum speed 40 km/h as standard - Super creep speed (0.5 km/h) as standard - Front axle, standard with all-wheel drive as standard - All-wheel drive with a lamellar clutch as standard - Differential lock with a claw clutch as standard - Clutch, reinforced as standard - Engine speed memory as standard - 75 hp maximum power, 75 hp approved rated power, ECE R 120 as standard - Exhaust on the side - €275 - Fuel tank 95 liters incl. protection as standard Hydraulics - Open hydraulic circuit, 60 l/min, 2 pumps as standard - 3 control units, mechanical, single/double acting with flow regulator €990 Front attachment - Front weight carrier 110 kg - Without front loader mounting console Rear attachment - Regulation of the rear lift, mechanical - Rear lift 3.0 t, mechanical - Lower link reinforced, pick-up hitch Cat. 2, fixed - Top link with pick-up hitch Cat. 2 - Side stabilizers on the lower link, inside, mechanical - Lift rods, mechanically adjustable - External operation of the rear lift, mechanical - Long drawbar with adjustment rails - Towing hitch, automatic - PTO 540/1,000 rpm - Rear PTO engagement, mechanical Cab + Comfort - TREND platform, folding roll bar - Without sun visor, front - Driver's seat, air-suspended - Without radio preparation - Steering column, rigid with steering wheel, standard - Headlights, halogen - Halogen work lights, 1 x rear Crodpfx Ae Af Rhzofaei - Exterior mirrors, mechanically foldable - Rotating beacon, halogen Driver assistance systems - Without ISOBUS pre-equipment Tires - 420/65 R20 Mitas AC65 128 A8 / adjustable rim - 540/65 R30 Mitas AC65 / adjustable rim Fenders - Front fender, pivoting, 410 mm - Fender extension 200 mm Additional equipment - Wheel chock, 1 piece - Tool box - Technical documentation - Germany

Condition: used, Year of construction: 2007, GPS Adapter (Int. No. 17657) Crsdpe Ah D Rxofx Afaei Claas GPS Adapter Year of manufacture 2007 Belt drive for 492 - 498 Drive on the right and left Ready for immediate use All spare parts still available Financing options starting from 2% are available for used and new machines. This is merely an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2010, Pickup PU 300 HD L PRO with roller support (internal no. 16263) 3.00 m Roller support Hydraulic lifting and lowering of the feed auger 3rd guide wheel, centered Cedpfxj Ahn Iwe Afaori Hydraulically retractable support wheel Protective cover Quick-release coupling 4 rows of tines PTO shaft on top, side Options: Oscillating frame with welded-on parts (. 15925) 3,900 EUR plus VAT For converting a standard pickup into a contour pickup Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options in Germany and abroad. Trade-in of other machines is possible.

Condition: used, Year of construction: 2013, Claas Pick Up 300 Pro T, quick-release coupling, 5 tine rows Csdpfxo Ahn H Do Afaeri (Int. No. 16266) 3.0 m 5 tine rows Quick-release coupling Roller presser Steering wheels can be hydraulically retracted Hydraulic lifting of the feed auger 3rd steering wheel, in the center Pre-tension spring for the feed auger, left and right Extension for the feed paddles Options: Chain sprockets Z 24 / 18 to increase the speed of the feed auger, 450 EUR plus VAT. Swinging frame with welded-on parts (Int. No. 15925) 3,900 EUR plus VAT. For converting a standard pickup to a contour pickup. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options in Germany and abroad. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2006, Pick up 300 HD, Crsdo Ahp I Djpfx Afaji (Internal No. 11463) Roller support, Working width 3.0 m, Raising/lowering intake auger, Hydraulic digging during reversing, Guide wheel in the center Option: Oscillating frame with welded-on parts (Internal No. 15925) 3,900 EUR plus VAT. For converting a standard pick-up to a contour model. Financing options are available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2014, Claas Pickup 3.0m 300 Pro T (Int. No. 16265) Pickup 300 PRO T Year of manufacture: 2014 3.0m Crodpfxj Ahp Ezs Afaei 5 tine rows Quick coupler Hydraulic lifting mechanism for the pick-up auger Mounting kit, 3rd feeler wheel, center Pre-tension spring for the pick-up auger, left and right Pick-up paddles – extension Roller support Feeler wheels can be hydraulically swiveled in Options: Chain sprockets Z 24 / 18 to increase the pick-up auger speed 450 EUR plus VAT Oscillating frame with welded-on parts (. 15925) 3,900 EUR plus VAT For converting a standard pick-up to a contour pick-up Financing from 2% is possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of trading in other machines.

Condition: used, Year of construction: 2003, Claas Conspeed 6-75 FC, foldable (Int. No. 13700) Year of manufacture: 2003 6 rows 75 cm Tapered picking rollers, Under-mounted shredder, PTO shaft, Hydraulically foldable, Stubble trimmer, The tapered rollers allow less foliage to pass through the machine. Immediately ready for use. Cjdpo Ah Rm Sefx Afajri Options: AutoContour 2,400.00 EUR plus VAT Autopilot 2,200.00 EUR plus VAT Stubble trimmer 490.00 EUR plus VAT Lighting bar 280.00 EUR plus VAT Hood extension 980.00 EUR plus VAT Forage corn auger 4,900.00 EUR plus VAT Additional stubble trimmer 490.00 EUR plus VAT Additional lighting for combine harvester 980.00 EUR plus VAT This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options both nationally and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2014, Claas Conspeed 4-75 C 4-row, 75 cm linear (Internal No. 13882) Underslung chopper, 75 cm, Hydraulic adjustment of the picking plates, Counter blade kit, PTO shaft left and right, approx. 250 hectares Options: Stubble cutter 390.00 EUR plus VAT Lighting bar 280.00 EUR plus VAT Hood extension 980.00 EUR plus VAT Financing options starting from 2% are available for used and new machines. Cjdpfe Ah Rlusx Afasri This is only an advertisement and serves for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. There is also the possibility of trade-in for other machines.

Condition: used, Year of construction: 2012, Orbis 450 Premiumline (Int. No. 13004) Orbis 450 Premiumline, manufactured in 2012 Swing frame Additional kit for whole-crop silage Extension for chopping corn for storage Wear plates for sliding runners PREMIUM LINE Corn chopper 492-498 agricultural machine Cedpfe Ahqgiex Afasri This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options, both domestically and internationally. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2010, Claas Direct Disc 610 Comfort (Internal No. 19858) Claas Direct Disc 610 Comfort Cedo Ah Ed Depfx Afaeri Year of manufacture: 2010 Contour C 6.0m working width Conveyor hood kit Belt drive, 3-ribbed, machine side (Jaguar type 494) Paddle roller lifting mechanism, hydraulic Transport trailer Storage platforms for Direct Disc Comfort Financing options starting from 2% are available for used and new machines. This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options, both domestically and internationally. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2004, Claas Conspeed 6-75 FC Dominator / Mega, foldable, conical rollers (Int. No. 15551) Year of manufacture: 2004 Conical rollers Suitable for Dominator, Mega, Medion 6 rows 75 cm Hydraulically foldable Agricultural machine, 950 hectares Options: Stubble chopper 490.00 EUR plus VAT Lighting bar 280.00 EUR plus VAT Hood extension 980.00 EUR plus VAT Cedpe Ah Rmnsfx Afasri Forage corn auger 4,900.00 EUR plus VAT Additional stubble chopper 490.00 EUR plus VAT Additional lighting for combine harvester 980.00 EUR plus VAT This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options in Germany and abroad. Trade-in of other machines is possible.

Condition: used, Year of construction: 2005, Claas Pick Up 3.0m HD (Internal No. 15932) Year of manufacture: 2005 Csdpfx As Ahp Eaofajri Suitable for models 941 / 942 Mechanically foldable pendulum support wheels Roller pressure bar 18.5 x 50 x 8 Center wheel Hydraulic auger lifting system Option: Pendulum frame with weld-on parts (. 15925) 3,900 EUR plus VAT For converting a standard pickup to a contour pickup Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options both domestically and internationally. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 1995, Claas Mega 204 I Pre-accelerator drum (internal number: 15312) Year of manufacture: 1995 Csdpfx Afe Ahqtgeaori 2690 drum hours, Mercedes engine, Cab, Air conditioning, Heating, 3D 5 shakers 6200 liter grain tank Hydrostatic drive Tires: 620-75 R30 70% 405-70 R20 NEW Folding cutter bar 4.5m, Mega bearings new Rubber sieve boxes NEW on the right and left, Engine drive, Bell and torsion rubber / bearings new Option: Cutter bar 4.5m Lexion, additional price 5,000.00 EUR plus VAT. Cutter bar 5.10m, additional price 7,500.00 EUR plus VAT. Cutter bar 6.0m, additional price 9,500.00 EUR plus VAT. All-wheel drive axle, 6,900.00 EUR plus VAT. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. It is possible to trade in other machines.

Condition: used, Year of construction: 2016, CLAAS Conspeed 6-75 FC (Int. No. 13125) CLAAS Conspeed 6-75 FC Year of manufacture 2016, Hybrid roller Stubble cutter Counter-blade kit PTO shaft for Lexion Rear forage harvester protection, NEW Options: Autopilot 1,900 EUR plus VAT AutoContour 1,250 EUR plus VAT Mechanical drive for maize header 950 EUR plus VAT Hydraulic drive for maize header 3,900 EUR plus VAT Lighting bar 280 EUR plus VAT Hood extension 980 EUR plus VAT Crsdpfx Afs Ah Rmkeaoi Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. Trade-in of other machines is possible.

Condition: used, Year of construction: 2010, Claas Orbis Autocontour corn harvester (Int. No. 16277) Year of manufacture: 2010 Working width: 7.50 m Quick coupler Central locking 2-speed gearbox Transport width: 3.0 m Crsdpfs Ahp Nlsx Afasi Transport protection with lighting Options: NEW corrugated cutting blades, 20% more performance 3,900 EUR plus VAT Autopilot 2,500 EUR plus VAT Blades upgraded to the latest standard / Series 2023 3,900 EUR plus VAT Financing available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2004, CLAAS Liner 1550 TWIN Profil, (Int. No. 13395) Year of manufacture 2004 6.8 / 7.5 m working width, single wide-angle articulated shaft Lower link attachment, Lighting, Steering axle, Trailing device, Transport width 3.0 m, two rotors, 11 tine arms, Tires: 185 R14 300/65 12 8x 16x650/8 Side and single-row swathing possible. 1 and 2 row swath deposition, Also available on customer order with 9.0% down payment. Rotors were upgraded to the latest standard in 2017. Financing options starting from 2% are available for used and new machines. Cedpfo Ahh H Ajx Afaori This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options in Germany and abroad. Trade-in of other machines is possible.

Condition: used, Year of construction: 2024, Demonstration machine / Equipment: Front three-point linkage + front PTO / Control of the rear three-point linkage, mechanical / Lower link reinforced, drawbar hook cat. 2, fixed / Side stabilizers on the lower link, internal, mechanical / Upper link with drawbar hook cat. 2 / Long drawbar with adjustment rails / Towing hitch, automatic / Without hydraulic trailer braking system / Open hydraulic circuit, 60 l/min, 2 pumps / 3 control valves / Flow regulator / 24/12 gears, REVERSHIFT and TWINSHIFT / Maximum speed 40 km/h / Front axle, standard with all-wheel drive / PTO 540/1,000 rpm / 320/70 R24 Mitas AC70T / Adjustable rim / 480/70 R30 Mitas AC70T / Adjustable rim / 75 hp maximum power, 75 hp homologated rated power, ECE R 120 / Exhaust on the cab pillar, right / Fuel tank 95 liters / Driver's seat, fabric, air-suspended / Air conditioning 2,570.0 Cedpfj Agh Dmjx Afasri

Condition: used, Year of construction: 2020, Claas Knife Sharpening Machine (Int. No. 13035) Claas Knife Sharpening Machine Aqua Non Stop Year of manufacture: 2020 First use: 2021 Comfoort Ans-C Original packaging Operating manual, Original packaging, Product description (Source: CLAAS): With the AQUA NON STOP COMFORT, knives from almost all manufacturers can be sharpened. The tool-free conversion to sharpen different knife types with a minimal setup time of less than one minute is a particular feature of this fully automatic machine. The knives can be placed precisely in the designated knife holder. Incorrect insertion of the knives is virtually impossible. The templates enable an exact sharpening of the grinding stone along the knife contour. This ensures that the original contour of the knife is maintained and the service life is increased. Optimal cutting quality is the result. Simple operation. Important settings can be made intuitively on the ergonomically arranged control terminal. The machine is switched on and off here, and the number of sharpening cycles is preselected. The sharpening pressure can be adjusted to the conditions by means of a rotary knob and displayed on a pressure gauge. Furthermore, diagnostic functions are also available here for the service technician. High-tech at a high level. The fully automatic machine is controlled by compressed air. The operation of the lifting table and the sharpening motor, as well as the removal of the knives, is carried out pneumatically. Various sensors and pressure switches ensure the sequence control and operational safety. All processes are monitored and can be made available for diagnostic purposes via a sensor query. Fully automatic. The knives are automatically removed. A safety circuit ensures the safe removal of the sharp knives. The knife storage area offers space for the entire set of knives. Clean work. The grinding debris is collected in a chip drawer. Two baffle stages ensure reliable separation of the chips, so that the ambient air is completely free of grinding dust. The chip drawer can be emptied at any time. Subject to changes, errors and prior sale. Options: C09 for Claas knives 245.00 EUR plus VAT. K11 for Krone knives 245.00 EUR plus VAT. U1 for Schuitemaker 245.00 EUR plus VAT. Option: Knife sharpening: Codpfxj Ahicus Afaeri On-site knife sharpening is possible with the CLAAS NonSTOP knife sharpening machine. Claas knives and other knives are possible. Per knife, four cycles at 2.00 EUR plus VAT. For blunt knives, an additional 0.50 EUR plus VAT per cycle. Financing from 2% is possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2015, Claas Orbis 900 AC 3T, suitable for models 494-498 (Internal No. 11234) Year of manufacture: 2015 Working width: 9.0 m 12 rows AutoContour (slope compensation) automatic steering, autopilot central control panel Quick-release coupling 3T integrated chassis Financing options starting from 2% are available for used and new machines. Csds Ahqlgjpfx Afasri This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2009, Orbis 600 AC (Int. No. 13632) Year of manufacture: 2009 First use: 2010 Quick coupler, Pro, Working width: 6.0 m, Swinging frame, Storage maize auger, Quick coupler Cedpfe Ahqansx Afajri Options: Lighting system, warning signs: 450 EUR plus VAT. Integrated chassis: 4,900 EUR plus VAT. Autopilot: 1,950 EUR plus VAT. AutoContour: 2,400 EUR plus VAT. Knife set upgraded to the latest standard / 2023 series: 2,900 EUR plus VAT. Financing available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2014, Claas Conspeed 8-75 FC (Int. No. 17690) Claas Conspeed 8-75 FC Crsdps Ah Rp Ajfx Afaji 8-row Year of manufacture 2014 75cm row spacing Folding hybrid rollers Stubble conditioner Counter blade kit PTO shaft for Lexion (Type C65 / C63) + Tucano (Type 838 / 828) Protective bar incl. lighting Transport protection incl. side cover Transport width 3.0m Options: Hood extension 950 EUR plus VAT Autocontour 1,900 EUR plus VAT Financing options available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2016, Rolland 340 RAF PU 1.85 m Rake-and-Pick-up Combination (Internal No. 14038) Year of manufacture 2016 3564 bales Twine binding, electric operation, guide wheels on pick-up, fixed, rake-and-pick-up combination, standard press chamber rollers, twine binding, single-angle PTO shaft with shear coupling, 6-piece, 1 3/8", tractor hydraulic connection, metric, hydraulic/electronics Roto Feed feeding system, universal drawbar for lower and upper hitch, towing eye D40, input gearbox 540 rpm, CLAAS standard terminal CST, lighting according to STVZO (German Road Traffic Licensing Regulations), Tires: 11.5/80 15.3, 95% remaining Crsde Ahia Ispfx Afaei The hay is gently fed into the machine by the rake. No rotor, no APS, Soft core on the outside, dense (hard) inside. Options: Bale ejector 560.00 EUR plus VAT. Net binding 2,450.00 EUR plus VAT. Financing options available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is also the possibility of taking in other machines in part exchange.

Condition: used, Year of construction: 2009, Claas Direct Disc 520 Contour 493/498 (Internal No.: 12369) Year of manufacture: 2009 Working width: 5.2 m Quick coupler, electric start roller, two speeds, blades, quick-change system, paddle roller Option: Self-built platform trailer: 2,500.00 EUR plus VAT. Tires: 10.00-20 Support wheel Original CLAAS trailer: 6,900.00 EUR plus VAT This is only an advertisement and serves for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. Crodpfx As Ah Ef Tjfaoi

Condition: used, Year of construction: 2004, Claas Corn Harvester Conspeed 6-75 FC (Int. No. 19861) Claas Corn Harvester Conspeed 6-75 FC Year of manufacture 2004 Hybrid rollers 6-row 75cm row spacing Storage corn augers Codpfx Afe Ah Rl Aoaeri Stubble chopper Suitable for Lexion Options: Autopilot 1,900 EUR plus VAT Autocontour 1,250 EUR plus VAT Lighting bar 280 EUR plus VAT Hood extension 980 EUR plus VAT Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. There is also the possibility of trade-in for other machines.

Condition: used, Year of construction: 1986, Rollant 44 Baler (Int. No. 20989) Claas Baler Type Rollant 44 Year of manufacture 1986 Twine tying 1.20m bale diameter Fixed chamber baler Roller press system PTO drive Mechanically adjustable support wheel Cjdpfx Afj Ahih Ssaeri Agricultural machine! Private sale according to §25a UStG (German VAT Act) Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. There is also the possibility of trading in other machines.