Used Claas Quadrant for sale (1,132)

Condition: used, Year of construction: 2000, Claas cutter bar 540V Auto Contour (Int. No. 17013) Year of manufacture: 2000 AutoContour Mechanical reel drive Splash guard Reel, horizontal Reel, vertical Folding straw divider Single-axle cutter bar carriage Support wheel Fjdpfx Aks Aihdzeaegi Lighting Tires: 10.3 Financing options starting from 2% are available for used and new machines. This is only an advertisement intended for informational purposes. The purchase contract can be concluded with us in accordance with our general terms and conditions. We will be happy to assist you with financing options, both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2002, Claas cutter bar C600 Fgjdpfxs Aihdps Akaoi (Int. No. 19857) Claas cutter bar C600 for Lexion Year of manufacture 2002 folding crop dividers Claas cutter bar carriage Year of manufacture 2003 Tires 10.3 (80%) 6.00m - 7.50m Option: New rapeseed table with 2 hydraulic knives 9,900 EUR plus VAT. Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: good (used), working width: 2,350 mm, Front-mounted forage harvester Müthing, K80, support leg, PTO shaft, hydraulic brake, roller press, control panel, weighing system, CEMIS 700, bale counter, ejector, 51 knives Fodo Aiar Ispfx Akasgi Tires (width): 650/50R22.5, speed: 40 km/h, number of knives: 51, bale size (width): 120 cm, bale size (length): 50 cm, bale size (min. diameter/height): 90 cm, ball hitch (K80), bale ejector, on-board computer/monitor, air brake, twine tying, knot cleaner, steering axle, pick-up, roller press, support leg/wheel, cutting unit, tandem axle, weighing system, wide-angle PTO shaft, central lubrication, fixed chamber, cleaning system, ISOBUS, lower hitch (eye), moisture measurement = More information = Year of manufacture: 2023 Technical condition: good Optical condition: good Bale count: 7800 Please contact Ria Lange for further information.

Condition: used, Year of construction: 1995, Claas Mega 204 I Pre-accelerator drum (internal number: 15312) Year of manufacture: 1995 2690 drum hours, Mercedes engine, Feds Ahqtgspfx Akaegi Cab, Air conditioning, Heating, 3D 5 shakers 6200 liter grain tank Hydrostatic drive Tires: 620-75 R30 70% 405-70 R20 NEW Folding cutter bar 4.5m, Mega bearings new Rubber sieve boxes NEW on the right and left, Engine drive, Bell and torsion rubber / bearings new Option: Cutter bar 4.5m Lexion, additional price 5,000.00 EUR plus VAT. Cutter bar 5.10m, additional price 7,500.00 EUR plus VAT. Cutter bar 6.0m, additional price 9,500.00 EUR plus VAT. All-wheel drive axle, 6,900.00 EUR plus VAT. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. It is possible to trade in other machines.

Condition: used, Year of construction: 2022, -- 3400 Bales -- Quadrant 5200 EVOLUTION FC Tandem - 100 years of knotter technology - Pickup with POWER FEEDING SYSTEM (PFS), pick-up width 2.35 m - Gauge wheels for pickup, pivoting and manually foldable (Ø 40 mm) - Flywheel brake, hydraulic - Control line for load-sensing system - FINE CUT cutting rotor with 51 knives (51-26-25-13-0) - Harvest equipment Plus - Hydraulic folding for bale ramp with weighing system - Bale ramp with 3 rollers and weighing system - Press flap for moisture sensor - Bale ejector - Twine box, dustproof and swiveling - Single-wide-angle PTO shaft, 6-piece, 1 3/8" - Hydraulics/Electronics - Universal drawbar for lower hitch - Ball hitch K80, MR - Shear bolt coupling - Wheel cover for 620/50 R22.5 tires - Tandem steering axle - Tires 620/50 R22.5 - Two-line pneumatic braking system for tandem steering axle 22.5" - LED work lights - Moisture sensor for determining residual moisture content - Bale discharge sensor - PROFI CAM camera - TONI - TELEMATICS ON IMPLEMENT - Left/Right indicator incl. knotter monitoring - Folding via terminal for bale ramp with weighing system - CEMIS 700 - Bale length adjustment, electric - Press pressure control, automatic - Central lubrication system, automatic, electrically controlled - Road-legal equipment MR with braking system - Storage box, dustproof and waterproof - Technical documentation, German - Fire extinguisher 6 kg - Battery cable Fgodpj Agia Rofx Akaoi - Speed sticker 60 km/h - Lighting according to StVZO (German Road Vehicle Regulation)

Condition: used, Year of construction: 2013, Claas Pick Up 300 Pro T, quick-release coupling, 5 tine rows (Int. No. 16266) 3.0 m 5 tine rows Fedpfxe Ahn H Do Akasgi Quick-release coupling Roller presser Steering wheels can be hydraulically retracted Hydraulic lifting of the feed auger 3rd steering wheel, in the center Pre-tension spring for the feed auger, left and right Extension for the feed paddles Options: Chain sprockets Z 24 / 18 to increase the speed of the feed auger, 450 EUR plus VAT. Swinging frame with welded-on parts (Int. No. 15925) 3,900 EUR plus VAT. For converting a standard pickup to a contour pickup. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options in Germany and abroad. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2014, Claas Pickup 3.0m 300 Pro T (Int. No. 16265) Pickup 300 PRO T Year of manufacture: 2014 3.0m 5 tine rows Quick coupler Hydraulic lifting mechanism for the pick-up auger Mounting kit, 3rd feeler wheel, center Pre-tension spring for the pick-up auger, left and right Pick-up paddles – extension Fjdpfx Aj Ahp Ezjkaogi Roller support Feeler wheels can be hydraulically swiveled in Options: Chain sprockets Z 24 / 18 to increase the pick-up auger speed 450 EUR plus VAT Oscillating frame with welded-on parts (. 15925) 3,900 EUR plus VAT For converting a standard pick-up to a contour pick-up Financing from 2% is possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of trading in other machines.

Condition: used, Swivel hydraulic lifting device for Xerion 3300-3800 semi-trailer tractor Fedpfx Akj Ahyqboaogi (12052) Part no.: 581.529.

Condition: used, Year of construction: 2010, Claas Orbis Autocontour corn harvester (Int. No. 16277) Year of manufacture: 2010 Working width: 7.50 m Quick coupler Central locking 2-speed gearbox Transport width: 3.0 m Transport protection with lighting Fgodpj Ahp Nlofx Akaoi Options: NEW corrugated cutting blades, 20% more performance 3,900 EUR plus VAT Autopilot 2,500 EUR plus VAT Blades upgraded to the latest standard / Series 2023 3,900 EUR plus VAT Financing available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2012, Orbis 450 Premiumline (Int. No. 13004) Orbis 450 Premiumline, manufactured in 2012 Swing frame Additional kit for whole-crop silage Extension for chopping corn for storage Wear plates for sliding runners PREMIUM LINE Corn chopper Fgjdpfx Ao Ahqgiokasi 492-498 agricultural machine This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options, both domestically and internationally. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2010, Claas C450 folding cutter bar (Internal No. 19859) Claas C450 cutter bar for Lexion Year of manufacture 2010 Auto Contour 4.50m working width Folding crop divider Hydraulic reel drive Options: Lighting bar 250 EUR plus VAT Fgede Aig I Espfx Akaei Rape table, 2 electric side knives 6,900 EUR plus VAT Financing options starting from 2% are available for used and new machines. This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-ins of other machines are possible.

Condition: used, Year of construction: 2020, Claas Knife Sharpening Machine (Int. No. 13035) Claas Knife Sharpening Machine Aqua Non Stop Year of manufacture: 2020 First use: 2021 Comfoort Ans-C Original packaging Operating manual, Original packaging, Product description (Source: CLAAS): With the AQUA NON STOP COMFORT, knives from almost all manufacturers can be sharpened. The tool-free conversion to sharpen different knife types with a minimal setup time of less than one minute is a particular feature of this fully automatic machine. The knives can be placed precisely in the designated knife holder. Incorrect insertion of the knives is virtually impossible. The templates enable an exact sharpening of the grinding stone along the knife contour. This ensures that the original contour of the knife is maintained and the service life is increased. Optimal cutting quality is the result. Simple operation. Important settings can be made intuitively on the ergonomically arranged control terminal. The machine is switched on and off here, and the number of sharpening cycles is preselected. The sharpening pressure can be adjusted to the conditions by means of a rotary knob and displayed on a pressure gauge. Furthermore, diagnostic functions are also available here for the service technician. High-tech at a high level. The fully automatic machine is controlled by compressed air. The operation of the lifting table and the sharpening motor, as well as the removal of the knives, is carried out pneumatically. Various sensors and pressure switches ensure the sequence control and operational safety. All processes are monitored and can be made available for diagnostic purposes via a sensor query. Fully automatic. The knives are automatically removed. A safety circuit ensures the safe removal of the sharp knives. The knife storage area offers space for the entire set of knives. Clean work. The grinding debris is collected in a chip drawer. Two baffle stages ensure reliable separation of the chips, so that the ambient air is completely free of grinding dust. The chip drawer can be emptied at any time. Subject to changes, errors and prior sale. Options: C09 for Claas knives 245.00 EUR plus VAT. K11 for Krone knives 245.00 EUR plus VAT. Fgodpfx Ake Ahicujasi U1 for Schuitemaker 245.00 EUR plus VAT. Option: Knife sharpening: On-site knife sharpening is possible with the CLAAS NonSTOP knife sharpening machine. Claas knives and other knives are possible. Per knife, four cycles at 2.00 EUR plus VAT. For blunt knives, an additional 0.50 EUR plus VAT per cycle. Financing from 2% is possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2021, Fine Cut cutting rotor with 51 knives, flywheel brake, hydraulic bale ejector, wide-angle PTO shaft, K 80 lower hitch, tandem steering axle, air brake, moisture sensor, bale discharge sensor, ISO bus without operator terminal, automatic central lubrication, tires 620/50R22.5. Fsdpsz Sazvjfx Akajgi

Condition: used, Year of construction: 2005, Claas Vario V750 with transport trailer (Internal No. 21238) Fgsdpfxs Aihncj Akaei Claas Vario cutter bar V750 Year of manufacture 2005 Auto Contour cutter bar guidance Straw divider, adjustable and foldable Cutter bar mounted on transport trailer Vario cutter bar control with table module Horizontal reel Claas transport trailer Single-axle Options: Rapeseed knife, right-hand side, with transport box EUR 4,900 plus VAT Rapeseed knife, left-hand side EUR 3,900 plus VAT Financing options available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. There is also the possibility of trade-in for other machines.

Condition: new, Year of construction: 2026, operating hours: 38 h, Equipment: compressed air brake, Quadrant 5300 FC TA CLAAS large square baler PR_B06 Pick-up wheels, pivoting and hydraulically foldable PR_C03 Flywheel brake, hydraulic PR_C03 Control line for Load-Sensing System PR_C06 FINE CUT cutting rotor with 51 knives (51-26-13-12-0) PR_G02 Folding mechanism, hydraulic, for roller chute with weighing system PR_G06 Press flap for moisture sensor PR_G08 Bale ejector PR_H10 Twine box, dustproof and pivoting PR_M04 Simple wide-angle joint shaft, 6-piece, 1 3/8" PR_M14 Universal drawbar for top hitch PR_M18 Shear pin coupling PR_N01 Wheel arch for 620/50 R22.5 tires PR_N02 Tandem steering axle PR_N10 Tires 620/50 R22.5 PR_N12 Two-line pneumatic braking system for tandem steering axle PR_Q03 Work lights, LED High End PR_Q05 Bale discharge sensor PR_Q05 Folding mechanism via terminal for bale ramp with weighing system PR_Q05 PROFI CAM camera PR_Q05 TONI - TELEMATICS ON IMPLEMENT PR_Q06 CEMIS 700 PR_Q08 Bale length adjustment, electric Fjdpj Aa D Itjfx Akaogi PR_Q12 Press pressure control, automatic PR_R06 Central lubrication system, automatic, electrically controlled PR_S02 Road legal equipment MR with braking system PR_S04 Tool box 74 l, including accessories PR_S10 Speed sticker 60 km/h PR_B02 Pick-up with hydr. driven POWER FEEDING SYSTEM (PFS), 2.35 m PR_C18 Harvesting equipment Plus PR_G04 Roller chute with 3 rollers and weighing system PR_M12 Hydraulics/electronics for PFS, hydraulic PR_M16 Ball hitch K80, MR PR_Q05 Moisture sensor for determining residual moisture content PR_S05 Battery cable PR_S11 Fire extinguisher 6 kg PR_SBL Driver package

Condition: used, CLAAS cutter bar, 3.6 m, suitable for Mercator. Fsdpfx Ae Aig Ilokaegi

Condition: used, Year of construction: 2009, Orbis 600 AC (Int. No. 13632) Year of manufacture: 2009 First use: 2010 Quick coupler, Pro, Working width: 6.0 m, Swinging frame, Storage maize auger, Quick coupler Options: Lighting system, warning signs: 450 EUR plus VAT. Integrated chassis: 4,900 EUR plus VAT. Autopilot: 1,950 EUR plus VAT. AutoContour: 2,400 EUR plus VAT. Fgedj Ahqanopfx Akaei Knife set upgraded to the latest standard / 2023 series: 2,900 EUR plus VAT. Financing available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2005, Claas Pick Up 3.0m HD Fedpfx Aj Ahp Eaokajgi (Internal No. 15932) Year of manufacture: 2005 Suitable for models 941 / 942 Mechanically foldable pendulum support wheels Roller pressure bar 18.5 x 50 x 8 Center wheel Hydraulic auger lifting system Option: Pendulum frame with weld-on parts (. 15925) 3,900 EUR plus VAT For converting a standard pickup to a contour pickup Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options both domestically and internationally. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2014, Claas Conspeed 4-75 C 4-row, 75 cm linear (Internal No. 13882) Fode Ah Rluspfx Akasgi Underslung chopper, 75 cm, Hydraulic adjustment of the picking plates, Counter blade kit, PTO shaft left and right, approx. 250 hectares Options: Stubble cutter 390.00 EUR plus VAT Lighting bar 280.00 EUR plus VAT Hood extension 980.00 EUR plus VAT Financing options starting from 2% are available for used and new machines. This is only an advertisement and serves for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options both domestically and internationally. There is also the possibility of trade-in for other machines.

Condition: new, Year of construction: 2023, Claas V770 NEW (Int. No. 19143) Claas Vario 770 cutter bar, NEW 7.70 m Year of manufacture 2023 Auto Contour cutter bar guidance - 4 sensors Crop divider Short straw chopper with extended outer deflector, adjustable and foldable Cutter bar mounted on a transport trailer Transport trailer, 1-axle, 7.50 m / 7.70 m Support wheel, drawbar Tire size 10.3 Swiveling lighting bracket License plate light Fsdps Aihq Hjfx Akasgi Locking mechanism for the support Options: Rapeseed knife, right side, with box 4,900 EUR plus VAT Rapeseed knife, left side 3,900 EUR plus VAT Financing options starting from 2% are available for used and new machinery. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options, both domestically and internationally. Trade-in of other machinery is possible.

Condition: used, Year of construction: 2006, Pick up 300 HD, (Internal No. 11463) Roller support, Fgede Ahp I Dspfx Akasi Working width 3.0 m, Raising/lowering intake auger, Hydraulic digging during reversing, Guide wheel in the center Option: Oscillating frame with welded-on parts (Internal No. 15925) 3,900 EUR plus VAT. For converting a standard pick-up to a contour model. Financing options are available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2016, All-wheel drive axles, diameter 50, 10-hole Mudog (Int. No. 16269) All-wheel drive axles Mudog Year of manufacture 2016 Lexion C63 and others 10-hole, hub 175 Wheel studs 225 50 mm studs Fgsde Airnaopfx Akaoi with track rod without steering cylinder suitable for Lexion models with 50 mm and 80 mm studs Options: 2 wheels, 10-hole 500/85/24 (Continental, 50%), hub 175, wheel studs 225 EUR 2,900.00 plus VAT 80 mm studs, additional cost EUR 1,900.00 plus VAT This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options in Germany and abroad. There is also the possibility of a trade-in of other machines.

Condition: used, Year of construction: 2010, Pickup PU 300 HD L PRO with roller support (internal no. 16263) 3.00 m Roller support Hydraulic lifting and lowering of the feed auger 3rd guide wheel, centered Hydraulically retractable support wheel Protective cover Quick-release coupling 4 rows of tines PTO shaft on top, side Options: Oscillating frame with welded-on parts (. 15925) 3,900 EUR plus VAT Fodpfx Ake Ahn Iwoasgi For converting a standard pickup into a contour pickup Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options in Germany and abroad. Trade-in of other machines is possible.

Condition: used, Claas Adapter LKS, MKS, GPS (Int. No. 15977) For Jaguar harvesters Roller Application: corn header, cutter bars, corn pickers This is solely an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. Fedpfx Aj Ah D S Dskasgi

Condition: used, Year of construction: 2021, Claas cutter bar C 490 (Int. No. 21548) Fgodpfxs Aihado Akasi Claas cutter bar Type C 490 Year of manufacture 2021 Model year 2022 60 hectares worked, as new condition Working width 4.92 m Stone protection cutter bar 3.70 m - 4.90 m Short straw divider, adjustable and foldable Reel automatic Auger cutter bar, rigid Multi-finger pick-up auger Ø580 mm 15 ear lifters Hydraulic reel drive Knife bar driven on one side including spare knives Forward/reverse function via armrest Hydraulic reversing mechanism Transport cart 370 - 490 25 km/h Options: Rape table 6,900 EUR plus VAT Side knives, electric 3,900 EUR plus VAT Financing possible from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of a trade-in of other machines.