Used Kuhn Manure Spreaders for sale (265)

Condition: used, Year of construction: 2012, Kuhn Swather GA 15031 (Int. No. 16804) Type GA 15031 Year of manufacture 2012 Working width 9.4 m Bedpfxe Ahh Epe Ahajdi Rotor diameter 3650 mm 52 tine arms 4 double tines per arm Power requirement 88 kW Weight 7,500 kg Hydraulic rotor drive Bottom hitch Air brake Tire size, rotor 18x8.50-8 Tire size, chassis 600/50-22.5 Financing options starting from 2% are available for used and new machines. This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2021, Front-mounted mower-conditioner with roller conditioner (Int. No. 12195) Bjdpfe Ahh S Ssx Ahasdi Kuhn FC 3125 RF-FF Year of manufacture 2021, approx. 80 hectares worked 3.10 m working width, 7 mowing discs with disc protection and sliding shoes made of hardened steel, FAST-Fit quick knife change system, Disc shaft - overload protection Protectadrive, precise ground following and dynamic relief through multi-joint suspension, hydropneumatic relief Lift-Control, two driven and synchronized Squareflex rollers made of polyurethane, conditioner speed (min) 780, conditioner drive via gear drive, average swath width min/max 1.40/2.00 m, lifting for swath crossing via the implement lifting cylinder, front mounting, three-point linkage Cat II, PTO speed (min) 1000 Slip clutch, freewheel on the side gearbox, power at the PTO (kW/hp) 50/68, 1 single-acting control unit on the tractor, 1 electrical connection with a 7-pin socket on the tractor, lighting system with warning signs at the front and rear of the machine, weight: 1370 kg five wear plates for sliding shoes, screw-on double lifter for OPTIDISC ELITE mower bar Ideal for alfalfa. Does not crush the fodder but squeezes it against the roller conditioner. Also available on customer order. Financing from 2% is possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to take care of financing options in Germany and abroad. It is possible to trade in other machines.

Condition: used, Year of construction: 2012, Kuhn GMD802F-FF + Kuhn GMD8730 Bdjdpj Afl N Njfx Ahaei MAS030230 + MAS029700 Price applies to the current condition. Offer subject to change. Errors, modifications, and prior sale reserved. All information without guarantee.

Condition: used, Year of construction: 2014, Kuhn Grubber Mixter 100 (Int. No. 13075) Bsdpfxs Ahbruo Ahaodi Kuhn Mixter 100 / Mixter 9T Year of manufacture: 2014 First use: 2015 T-ring roller, Ø600mm Working width: 4.5 m Wing shares: 95% Narrow shares possible Two bars Two discs Four pairs of discs Nine tines Lighting Hydraulic roller adjustment Top ring roller Row spacing: 90 cm Hydraulically foldable 2270 kg Options: Narrow shares, NEW, 4 cm, hardened steel – EUR 79 each plus VAT. Lehner small spreader Supvervario 110, year of manufacture 2021, electric remote control – EUR 1,450 plus VAT. Financing options starting from 2% are available for both used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us in accordance with our general terms and conditions. We will be happy to assist you with financing options, both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2017, Kuhn disc harrow, (Int. No. 13049) Optimer 303 Year of manufacture: 2017 Working width: 3.0 m Harrow 24 discs, T-ring roller Bodpfxj Ahah Ns Ahajdi 2145 kg Offered on behalf of a customer, 9.5% This is merely an advertisement intended for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options, both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Claydon Hybrid Drill with Kuhn Speedliner is being sold on behalf of the customer! - The seeding technology is equipped with original Claydon parts. - Approximately 180 hectares used. - Working width of 3m. - The chassis is an original Kuhn Speedliner. - Six tires with 250/85 R 24. - The wheels run precisely between the seed rows. - Large seed hopper. - Separate PTO-driven oil circuit for fan and metering wheel drive. - Speed measurement with radar sensor. - Kuhn Electronic Concept T75. - Monitoring of the rotation of the metering shaft, fill level, Bodpfx As Afikdohaodi working hour counter, daily and total counter. - Variable row spacing adjustment, switchable individually on the left and right. - Assistance for calibration runs. - Adjustment of the seed rate possible while driving. - Storage of the setting for multiple seed varieties. - Automatic sequence program for engaging the fertilizer coulters with fertilizer distribution, starting the metering shaft, and engaging the seeding rail. - Separate fertilizer tank for band placement. - Hydraulic connections: 1 double-acting outlet. The machine is still at the customer's location! Inspection is possible and recommended by appointment! Telephone contact:

Condition: used, Year of construction: 2015, Kuhn VB 2160 Operator terminal VT 50 incl. ISOBUS connection Rotor with 14 knives Bedpfe Ahh Etsx Ahaodi new endless belts, 2024 Bale ramp at the rear

Condition: new, Year of construction: 2025, Demonstration machine at a special price!! KUHN ROWLINER 500 – Technical data Bjdpfxo Afly Uo Ahaedi - Working width 4.80 m - Transport width 3.00 m - Row spacing 75 cm - Number of rows 6 - 1 double-acting control valve required - Power requirement 60 hp / 44 kW - Road lighting - Adjustments: Mechanical - Mudguards mounted on the parallelogram - Finger weeder KUHN ROWLINK – Technical data - Camera-controlled shifting frame - Lateral displacement: up to 500 mm - Weight: approx. 560 – 680 kg - Max. frame width: approx. 6.99 m - Max. system weight: up to approx. 2,500 kg - Hydraulic requirement: approx. 20 l/min - Mounting: Three-point linkage, Cat. 2 Price applies to the current condition. Offer subject to change. Errors, modifications and prior sale reserved. All information without guarantee.

Year of construction: 2017, operating hours: 8,114 h, condition: used, - Central lubrication - Particulate filter The Kuhn SPW 22 Intense is a self-propelled animal feed wagon with two internal augers, boasting an impressive capacity of 22 cubic meters! This machine is from the first owner and has less than 8,000 original operating hours. Regularly serviced and used. The rear axle is permanently fixed and NOT steerable. For those interested, we can deliver the equipment to a specified address - contact the seller for more information. The machine is ready for immediate operation, ideal for medium- and large-scale farms looking for an efficient, precise, and economical solution for loading, chopping, and mixing TMR. NOTE! The feed wagon has many new parts, including: Conveyor belt New drum milling head New planetary gearbox Engine oils and filters at current mileage. TECHNICAL DATA: Model: KUHN SPW INTENSE 22 Year of manufacture: 2017 Mileage: 8,000 operating hours Hopper capacity: 22 m³ Bedpfezx Exyjx Ahajdi Mixing system: 2 vertical augers (twin-auger) Machine type: Self-propelled mixer wagon with loading cutter DIMENSIONS AND WEIGHT Total length: approx. 10.8–11.0 m Total width: approx. 2.50 m Height: approx. 3.05–3.10 m (depending on tires) Unladen weight: approx. 16,200 kg Turning radius: approx. 8.8 m – very good maneuverability in tight yards ENGINE / DRIVE Engine: 6-cylinder FPT / Fiat Powertrain (a Volvo engine was available in some configurations) – I will confirm on the nameplate) Power: approx. 165 kW / 224 HP Emissions: SCR / AdBlue system Transport speed: up to 25 km/h MIXING SYSTEM 2 vertical augers with speed regulation up to approx. 55 rpm KUHN auger tips (double wings) – better flow, faster mixing, lower energy consumption High homogeneity and short mixing times Solid chamber design – adapted to intensive work LOADING / CUTTER Loading cutter up to approx. 6 meters high – picks up silage even from high piles and silos Smooth control of speed and cutting force Fast and clean loading without spilling material The design allows for the collection of all types of silage: corn, haylage, alfalfa, and spent grain etc. UNLOADING PERFORMANCE AND FUNCTIONS Unloading belt with adjustable feed speed Precise feed distribution to the table or the aisle Chamber designed for complete emptying without mix retention CAB AND OPERATION Ergonomic VISIOSPACE operator's cab - excellent visibility to the cutter and work area Grammer operator's seat (air suspension) Joystick control Rear-view camera Radio Air conditioning Option to set automatic mixing and unloading programs TIRES / CHASSIS Sample tires (compatible with a machine of this model year): Front: 445/45R19.5 Rear: 315/70R22.5 The chassis is adapted to intensive farm work, also in difficult terrain. MACHINE CONDITION Machine with 8,000 hours of operation, fully Functional, well-maintained, and regularly serviced. It has been used on a single farm. With such a long service life, it's worth paying attention to: Auger bearings – regularly checked No hydraulic leaks SCR and AdBlue systems are working flawlessly Electronics and controllers are fully functional Tires in good condition (add the % wear if you know) Machine ready for testing. ADVANTAGES OF THIS MODEL...

Condition: new, Year of construction: 2026, Kuhn Venta 3030-24 incl. Kuhn HR3030 -LS drive -ISOBUS -hydraulic upper linkage -mechanical adjustment -press wheels with scraper Kuhn HR3030 -DURAKUHN zinc set -Megapacker roller -manual depth adjustment -hydraulic furrow opener MAS328080/MAS326060 Price applies to the current condition. Offer is subject to change. Errors, modifications, and prior sale reserved. All information without guarantee. Bsdpfo Afihcsx Ahaedi

Condition: good (used), Kuhn flail mower Bedpfe Agmwbjx Ahajdi Type: VKM 210 Working width: 2.10 m With side shift Heavy-duty version For more information, please call:

Condition: used, Year of construction: 2019, including FMW FC 313 F, serial number L2453, year of manufacture 2018. Bdedpe Agh Alofx Ahasi

Condition: used, Year of construction: 2018, Kuhn Planter 3TS – Single-seed drill - 4.5 m working width - Lighting - Rubber press wheels - Hydraulically foldable - 6 rows - 75 cm row spacing Bjdj Agh I Aopfx Ahajdi

Condition: used, Year of construction: 2016, used Kuhn VARI-Master plow Bdedpo Agv Axsfx Ahaji Packing arm Strip coulter Disc harrow Support wheel Loosening coulter included

Condition: used, Year of construction: 2018, Approximately 1,000 hectares have been worked with it; the control panel is included, as are discs for sunflower cultivation, and spare parts such as chains, etc., are also included. Bdjdpo Af Rg Iofx Ahaei

Condition: used, Year of construction: 2010, used Kuhn furrow plough Bdodpfx Ahj Agv Ntsaoi 8 furrows full body pre-tillage implement landside ploughshare

Condition: used, Year of construction: 2015, For sale: a used Kuhn SPV 10 Power feed mixer. Year of manufacture: 2015 Engine operating hours: 8799 h Identification number: 542052 Equipment: - Rear tires 215/75 R17.5 - Front tires 295/60 R22.5 - Programmable weighing system - Air suspension seat - Electrical package with windshield wipers on the left and right - Electrically adjustable and heated mirrors - 2 additional work lights - Hydraulically adjustable lateral conveyor belt - Hydraulically operated mixing auger cover - Color display monitor with 2 cameras Offer subject to change. The price applies to the current condition of the machine. For more information, please contact your Zürn sales representative. Bjdj Af Sm Topfx Ahaedi

Condition: used, Year of construction: 2013, Varimaster 123, 5-furrow model Combined front furrow and draft adjustment Bdedo Afd S Aopfx Ahaji Overload protection via shear bolts Coulter spacing 102 cm Frame height 80 cm LPO coulter ZRL pre-tillage tool Support wheel, shock-absorbing, 690x320 Concave disc, toothed, 600 mm Tower renewed

Condition: used, Year of construction: 1998, Serial number: 7, Number of furrows: 7, Chassis/hitch mechanism, pre-cutting device, other: KUHN Korser BEET plow, used, in good condition, hydraulic adjustment of working width, hydraulic overload protection, support wheel, chain for packer, pre-cutting device, ready for immediate use. Bdjdpo Agbxrofx Ahaei

Condition: used, Year of construction: 1992, Kuhn GF8501MH -8 tines -hydraulically foldable Bjdpfx Aj Afmnyjhasdi -lighting MAS009780 Price applies to the current condition. Offer subject to change. Errors, modifications and prior sale reserved. All information without guarantee.

Condition: used, Year of construction: 2019, Kuhn GMD 4411-FF MAS155550 Price applies to the current condition. Offer is subject to change. Errors, modifications, and prior sale are reserved. All information is provided without warranty. Bdedpj Afkqlsfx Ahaji

Condition: used, Year of construction: 2007, Kuhn FC883 RA – Defective Bdjdpfxs Aflfko Ahaei -Machine has been repainted in John Deere green. -Damage to the left side due to a collision. MAS167470 Price applies to the current condition. Offer subject to change. Errors, modifications, and prior sale reserved. All information is provided without warranty.

Condition: used, Year of construction: 1999, MAS316970 Bedpfo Afi Shex Ahaodi Price applies to the current condition. Offer is subject to change. Errors, modifications and prior sale reserved. All information without guarantee.

Condition: used, Year of construction: 2020, Kuhn GMD 3125F MAS173660 Bdsdpj Afmikefx Ahasi Price applies to the current condition. Offer is subject to change. Errors, modifications, and prior sale reserved. All information without guarantee.

Condition: used, Year of construction: 2020, Used cultivator Working width: 5.00 m Hydraulic depth adjustment Bsds Agv Ruepfx Ahaedi T-roller with scraper Tips are new