Used Kuhn Mulchers for sale (265)

Condition: used, Claydon Hybrid Drill with Kuhn Speedliner is being sold on behalf of the customer! Tedpfx Ahj Afikdjaed - The seeding technology is equipped with original Claydon parts. - Approximately 180 hectares used. - Working width of 3m. - The chassis is an original Kuhn Speedliner. - Six tires with 250/85 R 24. - The wheels run precisely between the seed rows. - Large seed hopper. - Separate PTO-driven oil circuit for fan and metering wheel drive. - Speed measurement with radar sensor. - Kuhn Electronic Concept T75. - Monitoring of the rotation of the metering shaft, fill level, working hour counter, daily and total counter. - Variable row spacing adjustment, switchable individually on the left and right. - Assistance for calibration runs. - Adjustment of the seed rate possible while driving. - Storage of the setting for multiple seed varieties. - Automatic sequence program for engaging the fertilizer coulters with fertilizer distribution, starting the metering shaft, and engaging the seeding rail. - Separate fertilizer tank for band placement. - Hydraulic connections: 1 double-acting outlet. The machine is still at the customer's location! Inspection is possible and recommended by appointment! Telephone contact:

Condition: used, Year of construction: 2012, Kuhn Swather GA 15031 (Int. No. 16804) Type GA 15031 Year of manufacture 2012 Working width 9.4 m Rotor diameter 3650 mm 52 tine arms 4 double tines per arm Power requirement 88 kW Weight 7,500 kg Hydraulic rotor drive Bottom hitch Air brake Tsdps Ahh Epsfx Ahaod Tire size, rotor 18x8.50-8 Tire size, chassis 600/50-22.5 Financing options starting from 2% are available for used and new machines. This is merely an advertisement for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2014, Kuhn Grubber Mixter 100 (Int. No. 13075) Tjdo Ahbruspfx Ahaed Kuhn Mixter 100 / Mixter 9T Year of manufacture: 2014 First use: 2015 T-ring roller, Ø600mm Working width: 4.5 m Wing shares: 95% Narrow shares possible Two bars Two discs Four pairs of discs Nine tines Lighting Hydraulic roller adjustment Top ring roller Row spacing: 90 cm Hydraulically foldable 2270 kg Options: Narrow shares, NEW, 4 cm, hardened steel – EUR 79 each plus VAT. Lehner small spreader Supvervario 110, year of manufacture 2021, electric remote control – EUR 1,450 plus VAT. Financing options starting from 2% are available for both used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us in accordance with our general terms and conditions. We will be happy to assist you with financing options, both domestically and internationally. Trade-in of other machines is possible.

Condition: used, Year of construction: 2021, Front-mounted mower-conditioner with roller conditioner (Int. No. 12195) Kuhn FC 3125 RF-FF Year of manufacture 2021, approx. 80 hectares worked 3.10 m working width, Tjdps Ahh S Sofx Ahasd 7 mowing discs with disc protection and sliding shoes made of hardened steel, FAST-Fit quick knife change system, Disc shaft - overload protection Protectadrive, precise ground following and dynamic relief through multi-joint suspension, hydropneumatic relief Lift-Control, two driven and synchronized Squareflex rollers made of polyurethane, conditioner speed (min) 780, conditioner drive via gear drive, average swath width min/max 1.40/2.00 m, lifting for swath crossing via the implement lifting cylinder, front mounting, three-point linkage Cat II, PTO speed (min) 1000 Slip clutch, freewheel on the side gearbox, power at the PTO (kW/hp) 50/68, 1 single-acting control unit on the tractor, 1 electrical connection with a 7-pin socket on the tractor, lighting system with warning signs at the front and rear of the machine, weight: 1370 kg five wear plates for sliding shoes, screw-on double lifter for OPTIDISC ELITE mower bar Ideal for alfalfa. Does not crush the fodder but squeezes it against the roller conditioner. Also available on customer order. Financing from 2% is possible for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to take care of financing options in Germany and abroad. It is possible to trade in other machines.

Condition: used, Year of construction: 2012, Kuhn GMD802F-FF + Kuhn GMD8730 MAS030230 + MAS029700 Price applies to the current condition. Offer subject to change. Errors, modifications, and prior sale reserved. All information without guarantee. Tjdpfs Afl N Nsx Ahaod

Condition: used, Year of construction: 2017, Kuhn disc harrow, (Int. No. 13049) Optimer 303 Year of manufacture: 2017 Working width: 3.0 m Harrow Tsdpfs Ahah Njx Ahaed 24 discs, T-ring roller 2145 kg Offered on behalf of a customer, 9.5% This is merely an advertisement intended for informational purposes. The purchase agreement can be concluded with us in accordance with our general terms and conditions. We will gladly assist you with financing options, both domestically and internationally. Trade-in of other machines is possible.

Condition: new, Year of construction: 2026, Kuhn Mulcher Tedpfxo Afl S Re Ahaed TBES 262, - in standard configuration - with 28 hammer flails MAS317620 Price applies to the current condition. Offer subject to change. Errors, modifications and prior sale reserved. All information without guarantee.

Condition: new, Year of construction: 2026, Kuhn TBES 262 bank mulcher, professional version 2.49 m working width 28 heavy-duty hammer flails on a reinforced rotor, driven by 4 SPBX V-belts 1 straight and 1 comb-type counter blade welded on, 4 mm welded wear plate Weight 1070 kg Tjdpfx As Affnxehaod Support roller with removable bearing Includes PTO shaft

Condition: new, Year of construction: 2026, Kuhn BPR 280 mulcher 2.80m working width 28 hammers driven via 5 SPBX V-belts with automatic belt tensioning 1 straight and 1 comb-type counter blade welded on 4mm welded wear plate Tede Affn Sjpfx Ahajd Weight: 1020kg Support roller with removable bearing Hydraulic side shift: 580mm Including PTO shaft

Condition: new, Year of construction: 2026, Kuhn Venta 3030-24 incl. Kuhn HR3030 -LS drive Tsdpfxo Afihcs Ahasd -ISOBUS -hydraulic upper linkage -mechanical adjustment -press wheels with scraper Kuhn HR3030 -DURAKUHN zinc set -Megapacker roller -manual depth adjustment -hydraulic furrow opener MAS328080/MAS326060 Price applies to the current condition. Offer is subject to change. Errors, modifications, and prior sale reserved. All information without guarantee.

Condition: new, Year of construction: 2024, Kuhn RM 610 R mulcher, Hydraulically foldable, Working width 6.1 m, Transport width 2.5 m, Tedpo Ad E D Rjfx Ahaod For tractors from 132 kW/180 HP to 257 kW/350 HP, 630 mm rotor diameter, 68 hammer flails, 220 mm support roller, Weight approx. 3200 kg.

Condition: used, Year of construction: 2015, Kuhn VB 2160 Operator terminal VT 50 incl. ISOBUS connection Rotor with 14 knives new endless belts, 2024 Tedj Ahh Etepfx Ahajd Bale ramp at the rear

Condition: new, Year of construction: 2022, For sale is a new flail mower from Kuhn, manufactured in 2022. Tjdpfx Aj Afidkshaod - Working width: 1.60 m - Transport width: 1.80 m - Rotor diameter: approx. 374 mm - Power requirement: approx. 40 hp

Condition: used, Year of construction: 2023, Kuhn FB 2130 Net wrapping Air brake system Tires: 480/45-17 Pickup with support wheels 667 bales!!! Todpfxs Ahh A Us Ahasd

Condition: new, Year of construction: 2025, Kuhn flail mower BP28 Year of manufacture 2025, stock machine The mounting bracket can be hydraulically shifted sideways on a sliding tube. The gearbox is not positioned in the center, which allows for a lateral offset of up to 45 cm to the right. The mounting bracket is connected to the tractor's top link via a joint, so that the machine can optimally adapt to the ground contours. - with 28 hammers - 1 straight and 1 comb-shaped counter blade Tsdpfxs Aflrwe Ahasd MAS294090

Year of construction: 2017, operating hours: 8,114 h, condition: used, - Central lubrication - Particulate filter The Kuhn SPW 22 Intense is a self-propelled animal feed wagon with two internal augers, boasting an impressive capacity of 22 cubic meters! This machine is from the first owner and has less than 8,000 original operating hours. Regularly serviced and used. The rear axle is permanently fixed and NOT steerable. For those interested, we can deliver the equipment to a specified address - contact the seller for more information. The machine is ready for immediate operation, ideal for medium- and large-scale farms looking for an efficient, precise, and economical solution for loading, chopping, and mixing TMR. NOTE! The feed wagon has many new parts, including: Conveyor belt New drum milling head New planetary gearbox Engine oils and filters at current mileage. TECHNICAL DATA: Model: KUHN SPW INTENSE 22 Year of manufacture: 2017 Mileage: 8,000 operating hours Hopper capacity: 22 m³ Mixing system: 2 vertical augers (twin-auger) Machine type: Self-propelled mixer wagon with loading cutter DIMENSIONS AND WEIGHT Total length: approx. 10.8–11.0 m Total width: approx. 2.50 m Height: approx. 3.05–3.10 m (depending on tires) Unladen weight: approx. 16,200 kg Turning radius: approx. 8.8 m – very good maneuverability in tight yards ENGINE / DRIVE Engine: 6-cylinder FPT / Fiat Powertrain (a Volvo engine was available in some configurations) – I will confirm on the nameplate) Power: approx. 165 kW / 224 HP Emissions: SCR / AdBlue system Transport speed: up to 25 km/h MIXING SYSTEM 2 vertical augers with speed regulation up to approx. 55 rpm KUHN auger tips (double wings) – better flow, faster mixing, lower energy consumption High homogeneity and short mixing times Solid chamber design – adapted to intensive work LOADING / CUTTER Loading cutter up to approx. 6 meters high – picks up silage even from high piles and silos Smooth control of speed and cutting force Fast and clean loading without spilling material The design allows for the collection of all types of silage: corn, haylage, alfalfa, and spent grain etc. UNLOADING PERFORMANCE AND FUNCTIONS Unloading belt with adjustable feed speed Precise feed distribution to the table or the aisle Chamber designed for complete emptying without mix retention CAB AND OPERATION Ergonomic VISIOSPACE operator's cab - excellent visibility to the cutter and work area Grammer operator's seat (air suspension) Joystick control Rear-view camera Radio Air conditioning Option to set automatic mixing and unloading programs TIRES / CHASSIS Sample tires (compatible with a machine of this model year): Front: 445/45R19.5 Rear: 315/70R22.5 The chassis is adapted to intensive farm work, also in difficult terrain. MACHINE CONDITION Todpozx Exyjfx Ahaed Machine with 8,000 hours of operation, fully Functional, well-maintained, and regularly serviced. It has been used on a single farm. With such a long service life, it's worth paying attention to: Auger bearings – regularly checked No hydraulic leaks SCR and AdBlue systems are working flawlessly Electronics and controllers are fully functional Tires in good condition (add the % wear if you know) Machine ready for testing. ADVANTAGES OF THIS MODEL...

Condition: used, Year of construction: 2017, Chassis, propeller shaft Working width: 800 cm, number of rotors: 8, lighting/warning signs, hydraulic folding, working width: 800 cm, number of rotors: 8, lighting/warning signs, hydraulic folding Tsdpfx Ahez Nlftjajd = Further information = Year of manufacture: 2017 General condition: good Technical condition: good Optical condition: good Please contact Ria Lange for further information.

Condition: new, Year of construction: 2025, Demonstration machine at a special price!! KUHN ROWLINER 500 – Technical data - Working width 4.80 m - Transport width 3.00 m - Row spacing 75 cm - Number of rows 6 - 1 double-acting control valve required - Power requirement 60 hp / 44 kW - Road lighting - Adjustments: Mechanical - Mudguards mounted on the parallelogram - Finger weeder KUHN ROWLINK – Technical data Tjdpfxo Afly Us Ahaed - Camera-controlled shifting frame - Lateral displacement: up to 500 mm - Weight: approx. 560 – 680 kg - Max. frame width: approx. 6.99 m - Max. system weight: up to approx. 2,500 kg - Hydraulic requirement: approx. 20 l/min - Mounting: Three-point linkage, Cat. 2 Price applies to the current condition. Offer subject to change. Errors, modifications and prior sale reserved. All information without guarantee.

Condition: used, Year of construction: 1992, Kuhn GF8501MH -8 tines -hydraulically foldable -lighting Tedpfx Aho Afmnyoaod MAS009780 Price applies to the current condition. Offer subject to change. Errors, modifications and prior sale reserved. All information without guarantee.

Condition: used, Year of construction: 2024, Equipment: cabin, had accident, ref: 250633 ! Damaged equipment / Accidenté/Damaged Equipment / Verunglücktes Material ! Reference: 250633 Type: front-mounted mulcher Brand / Model: KUHN PRO 210 First registration year: 2024 ! Damaged equipment ! - Incident details: impact with a fixed object - Procedure: Insurance Write-Off (VEI) with expert follow-up Damaged equipment sold as-is, sale only to professionals or for export purposes. ! Attention: vehicles are not eligible for any warranty, trade-in, exchange, refund, or claim after the sale!* ! Please note: vehicles cannot be covered by any guarantee, trade-in, exchange, refund, or claim at the end of the sale!* Price is excluding VAT. Delivery possible at an additional cost. More information and photos available on our website! Please make an appointment so we can welcome you under the best possible conditions! Tjdjyz Dmkjpfx Ahasd Our company, specializing in purchase and sale, operates a machinery yard of over 100,000 m2 south of Strasbourg. We stock over 350 machines including construction equipment, handling equipment, agricultural machinery, heavy goods vehicles, passenger vehicles, and commercial vehicles, with inventory renewed monthly. We will be pleased to welcome you at our premises: 17 Route d’Eschau, 67400 ILLKIRCH-GRAFFENSTADEN. *Description subject to errors Working width: 2m Delivery time (in days): 1

Condition: used, Year of construction: 2021, _____used Kuhn verge mulcherMachine type: TBE 222Working width 2.14 m with:- 24 heavy hammer flails- Rotor outer diameter 450 mm- two straight counter-cutting bars- Protective hood with 4 mm thick welded reinforced plate- Skid shoes with Hardox wear protection- Cutting height adjustment via support roller with removable bearing Swivel range 90° upwards and 65° downwards- Freewheel integrated in the input gearbox- Nonstop collision protection via spring-loaded safety device with mechanical stop- complete with double-sided wide-angle PTO shaft,Storage location: Schora Tjdpfjw Ivg Iex Ahajd

Condition: good (used), working width: 3,000 mm, Wing shares Share tips Disc type: toothed Carbide share 80/50 Wing, standard, 350 mm Roller, Flexliner, 3 m Spring-mounted star-hollow discs, 3 m Hydraulic, stepless roller adjustment Deflector Quick Card Cultimer L100/100 Number of shares: 13, lighting/warning signs, stone protection, rear mounting = Further information = Year of manufacture: 2023 Technical condition: good Optical condition: good Please contact Ria Lange for further information. Tjdpfsz Ninlex Ahaed

Condition: good (used), working width: 6,000 mm, Working width: 6.07 Type: Flail mower Freewheel articulated shaft: yes Depth control wheels: yes Equipped with 136 flails Currently, the original flails are still installed, as the machine has only been used to mulch lupine. Spare parts include belts and 2 large wear plates. Rear-mounted = Further information = Tsdpfx Aoz Nl N Sehaod Year of manufacture: 2017 Technical condition: good Optical condition: good Please contact Ria Lange for further information.

Condition: used, Year of construction: 2023, Kuhn CD3020 -Steeliner roller, 3.00m (550mm diameter, 125mm row spacing) -Manual depth adjustment, CD 3.00m -Front and rear lighting, each with warning signs -Mounting kit for seed drill -Furrow opener with vertical folding and overload protection with shear pin -Operating manual -Suitable for Kuhn Venta 3030-24 Tsdo Aflp Aepfx Ahajd MAS250850 Price applies to the current condition. Offer is subject to change. Errors, modifications and prior sale reserved. All information without guarantee.

Condition: good (used), working width: 4,000 mm, Hydraulic adjustment of the cutting angle new blades roller chassis Blade diameter: 66 cm, roller = Further information = Tedpsz Rtzxefx Ahasd Year of manufacture: 2002 Technical condition: good Optical condition: good Please contact Ria Lange for further information.