Heavy-duty shelf

Kragarmregal einseitig mit Dachträger Höhe 4,2 m / Tiefe 1,2 m / Länge 12 m

Cantilever racking with roof support: Hot-dip galvanized bolted system

Scope of delivery:
9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm
27 Cantilever arms with 1,200 mm usable depth, with stop
9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction
(*Without wooden purlins and trapezoidal sheets for the roof construction)
Including longitudinal and diagonal braces for 1,500 mm upright spacing
Incl. fastening material (without floor anchors)

- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Spare parts can be reordered and expansion is possible at any time)
- (*Offer available in larger quantities: approx. 50 uprights in stock)

Detailed description:
- Stable steel construction made of IPE profiles
- Surface of all components hot-dip galvanized
- Load capacity per upright 2,700 kg plus roof, wind and snow load
(Maximum snow load 1.85 kN/m² and wind load zone 2)
- Load capacity per cantilever arm 900 kg
- Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2)
- Cantilever arms adjustable in height in 100 mm increments
- 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright
= 4 storage levels on top of each other
- Including longitudinal and diagonal braces with 1,500 mm center distance
- Racking length: 12,100 mm
Bjdpfx Ash R Taqsp Aoww
- Including fastening material (without floor anchors)
- With assembly instructions and load signs C4 according to DIN standard

- Telephone technical advice
- Made in Germany
- Short delivery time
- On-site collection possible

Our cantilever racking is exclusively manufactured in Germany.
We offer reliable transport with advance notification before delivery.
The material is packed in a way that allows for easy unloading.

The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits.

The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended.
According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

The listing was translated automatically. Translation errors are possible.