Used paternosters & storage lifts for sale (133)

Condition: excellent (used), Technical information: 1. Kardex Number of upright frames: 13 Tjdjz Eqc Uspfx Ahasd Dimensions: L 3.46 x W 1.70 x H 4.8 m Weight of racking unit: 3.5 tons Load capacity per upright frame: 3 tons

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kardex Shuttle XP 500, dimensions 1850x864, year 2010, in very good condition. The unit features trays that are 1,850 mm wide and 864 mm deep. It has a total of 35 trays. External dimensions of the Kardex: Height: 6950 mm Width: 2780 mm Depth: 3074 mm Tray dimensions: 1850 x 864 Tjdpfszpw H Rsx Ahasd Load capacity per tray: 350 kg

Condition: used, Year of construction: 2003, Storage lift, Hänel type: 1300-825, year of manufacture 2003, with MP12 D control system and 2 retrieval stations (can also operate with only one retrieval station). Container dimensions: 1300 x 825 mm, maximum load capacity: 500 kg. Includes 36 containers (can accommodate up to 56 containers). Maximum load capacity: 30,000 kg. Tjdpfxez Ad Sgj Ahasd Installation area: 5939 mm high, width: 1625 mm, depth: 2810 mm. Further data can be found in the data sheets. All documents and plans are available. The storage lift is disassembled and stored, and is available for immediate delivery.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total height: 8,025 mm, total width: 3,405 mm, total length: 2,810 mm, load capacity per storage section: 250 kg, construction height: 50 mm, warranty duration: 12 months, Equipment: safety light barrier, Table preselection control with article management. Device comes from a lift system. Side shaft claddings have been retrofitted. No side access door. 4 units available. Machine height is adjustable. Storage lift including delivery, installation, DGUV acceptance & warranty. Tedpfjw S Udyox Ahajd

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, total height: 6,000 mm, total width: 1,750 mm, total length: 2,820 mm, load capacity per storage section: 500 kg, construction width: 1,300 mm, warranty duration: 12 months, – Tabular control panel with item management – Unit comes from a lift system – Side lift shaft cladding reproduced – 2 units available – 1300x825mm tabular panel, 500kg payload each Tjdpfx Ahjzaqibsaed

Condition: ready for operation (used), Year of construction: 1991, A roll paternoster ESKA storage and loading system is available. Roll width: 1600mm, max. load capacity: 2800kg, total height: 4300mm. Documentation available. An on-site inspection is possible. Tsdpsw I E Dcofx Ahasd

Condition: like new (used), Year of construction: 2013, functionality: fully functional, total height: 7,385 mm, total width: 1,471 mm, total length: 3,275 mm, 8 Kardex Megamat RS 350 vertical carousels in excellent condition. The installation includes 8 units manufactured between 2013 and 2018. Available in three height options: 7185 mm, 7384 mm, and 7585 mm. Each vertical carousel is configured with 34, 35, or 36 trays. For more details or inquiries, please do not hesitate to contact us. Tsdpov Svmrjfx Ahasd

Condition: good (used), Year of construction: 1995, Lifting system, Kardex, tray size: 1250x825mm, 7m high – used - : Price ex location: €13,950 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer / Kardex Type: Shuttle 1250x825x10000 Todpeyrqvfsfx Ahaod Device number: 95.008812/001 Year of manufacture: 1995 Tray size: 1250x825mm Device height: approx. 7m Depth: approx. 2.70m Width: approx. 1.6m Number of trays: 44 units Permissible total payload: 2x10,000kg Permissible shelf load: 250kg 3x400V, Current: 3x5.2, Power: 3.6 kW Condition: used Available: from approx. week 13/2026 Location: Speyer

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, load capacity per storage section: 500 kg, empty load weight: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The payment period is one week after purchase of the machine! Placing a bid obliges you to collect the machine on time between 17.11.2025 and 21.11.2025! Number of pallets: 55 included, space for 74. TECHNICAL DETAILS Load capacity per storage section: 500 kg Maximum container load: 500 kg Maximum total load: 40,000 kg Tray size: approx. 1860 x 825 mm MACHINE DETAILS Power: 6 kW Tjdpfx Ahjxm U U Hoasd Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 7,500 mm Weight: 5,000 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 3,900 mm, load capacity per storage section: 400 kg, Manufacturer: HÄNEL Model: Lean Lift Shelf dimensions: 3260/825mm Number of shelves: 25 Load capacity per shelf: 400 kg Rack height: 3.90m Year of manufacture: 2016 Operating hours (number of cycles): 22100 Maximum storage capacity: 40,000 kg Control system: MP 12N-S Hänel The rack is in excellent condition with minimal signs of wear. Tjdpjy Dgkkjfx Ahaod This machine is highly recommended. We can arrange transportation and installation after purchase.

Condition: used, Year of construction: 2011, total height: 11,550 mm, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C3000, with OP3000 OPGraphic color display Serial No.: 11007548/001 Year of construction: 2011 Load per tray: Medium: 205 kg & Heavy: 265 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 11,550 mm (height of Kardex is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid subject to the system being unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays, Medium: 205 kg & Heavy: 265 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 x 11,550 mm - Footprint of the system approx.: 10.39 m2 - Capacity with 32 trays: approx. 84 m2, each tray approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods - Control C3000, with OP3000 OPGraphic color display - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - Including light pointer (requires software to function; software is not included with the machine) Todpfezuvtaox Ahajd Price: on request, via email only Price: excl. VAT, including transport, installation and warranty Delivery time: in stock Machinehandel De Leeuw BV is one of the few companies in Europe that deals in and has in stock primarily used Kardex Remstar VLM automatic lift & rotating storage systems. See our website for current stock. We install and/or dismantle these systems in a safe manner with VCA-certified technicians, and we have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0/130084, total width: 5,000 mm, load capacity per storage section: 220 kg, construction height: 2,800 mm, input voltage: 400 V, input frequency: 50 Hz, Used storage lift / paternoster / shelving unit / organizational aid, fully functional, manufacturer: Eska Rollenpaternoster Application: workshop, warehouse, sales, retail, auto parts, etc. Type: TRPA, machine no. 0/130084 Overall height 2800 mm, overall width 5000 mm, circle diameter 685 mm, number of levels: 9, total load capacity 1980 daN The storage lift is fully functional and is no longer needed by us. Todpfx Aho Aa Rffjasd Shipping is only possible with payment of costs and advance payment (net). Sold as is, we assume no warranty or guarantee, no returns.

Condition: good (used), Year of construction: 2011, We now have two Kardex Shuttle XP 500 units, 3050 x 813 mm, from 2011 available for sale. The machines are in good condition and have been regularly serviced since installation. The Kardex Shuttle XP 500 is a reliable and proven storage system used by thousands of companies worldwide. Each tray is 3,050 mm wide and 813 mm deep, providing 2.5 m² of storage space. The system offers a total of 112.5 m² of storage space while using only 9.87 m² of floor space. Technical Information: Model year: 2011 Model: SHUTTLE-XP-500-3050x813 Machine height: 7,500 mm Todpfx Ahozybfxoaod Machine width: 3,380 mm Machine depth: 2,921 mm Tray width: 3,050 mm Tray depth: 813 mm Number of trays: Approx. 45 / machine Maximum weight per tray: 210 kg Electronics: 3/N/PE 230/400V 17A

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/20-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit Tsdexyygujpfx Ahasd

Condition: like new (used), Year of construction: 2021, We now have a Vertical Carousel from 2021 available for sale. The machine is in very good condition and has been serviced annually by the manufacturer since installation. The Vertical Carousel has a total height of 6,435 mm, making it suitable for many different types of storage and operations. It has a carrier width of 3,050 mm and a depth of only 428 mm. With 30 carriers, the machine provides a total of 39.2 m² of effective storage space. One of the main advantages of this machine is its space-saving design. It only requires approximately 4.7 m² of floor space, making it an excellent solution for companies that want to increase their storage capacity without needing more floor space. The machine also has very low operating hours, indicating that it has been used very little. It has always been kept in a clean and well-maintained environment. Technical information: Model year: 2021 Tsdpfx Asz Aphaehaed Model: MEG.RS.350.1.3050.4.381.30 Machine height: 6,435 mm Machine width: 3,675 mm Machine depth: 1,271 mm Number of carriers: 30 Maximum carrier height: 320 Carrier width: 3050 Carrier depth: 428 Electronics: 3/N/PE 400V, 16A

Condition: used, functionality: fully functional, total height: 6,300 mm, total width: 1,580 mm, total length: 2,680 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, KARDEX SHUTTLE 250 - 1250X825-NT GREY IN COLOUR 45 TRAYS TRAY DIMENSIONS 1250MM X 825MM Tsdpfx Aowtqz Ejhaed AUTOMATIC HEIGHT ADJUSTMENT FOR TRAYS WHEN ENTERING MACHINE 12 MONTHS WARRANTY SERVICE & MAINTENANCE CONTRACTS AVAILABLE THESE MACHINES ARE MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT INTO ANY HEIGHT RESTRICTIONS

Condition: used, Year of construction: 1991, Number of shelves: 10, three-phase mains connection: 380V, N/PE, frequency: 50Hz, duty cycle: 40%, supply fuse rating: 6A, rated power consumption: 1500W, an on-site inspection is possible. Todpfx Aezzqciohaod

Condition: excellent (used), Two well-maintained Kardex Megamat RS 350 machines from 2013 are available for sale. The Kardex Megamat RS 350 is one of the world’s most popular vertical carousel systems. It belongs to the same model series that is still available on the market today. Both machines have been used in a clean environment and have undergone regular maintenance. Each machine features: Carrier width: 3,250 mm Shelf depth: 428 mm 41 carriers These machines offer high storage capacity while occupying very little floor space. They are ideal for fast picking and compact storage of small to medium-sized items. The machines can be purchased individually or as a set of two. Tedozvqkcepfx Ahajd Technical Specifications Model year: 2013 Model: MEG RS 350.1.3250.4.305.41 Machine height: 6,985 mm Machine width: 3,875 mm Machine depth: 1,471 mm Number of carriers: 41 Number of shelves: 0 Maximum carrier height: 270 mm Carrier width: 3,250 mm Carrier depth: 428 mm

Condition: like new (used), Year of construction: 2019, We now have two Kardex Megamat RS 650 units available. Both machines were manufactured in 2019 and put into operation in 2020. They have been serviced annually by the manufacturer and are in very good condition. The Kardex Megamat RS 650 is a powerful vertical carousel designed for storing and handling heavy goods. Each carrier (base shelf) can hold up to 650 kg, making the machines suitable for storing large and heavy items. The two machines have a total of 34 carriers (base shelves) and 43 trays: 28 carriers without intermediate shelves, with a height of 348 mm 3 carriers with two intermediate shelves, providing a total of 9 trays with a clear height of 115 mm 3 carriers with one intermediate shelf, providing a total of 6 trays with a clear height of 170 mm The machines are also equipped with a Matrix display in the access opening. This LED display shows information such as the picking location, quantity, and other useful details. The Matrix display helps reduce search time and the risk of picking errors, making the picking process faster and easier. To utilize the full functionality of the Matrix display, the machines need to be connected to an ERP or Warehouse Management System (WMS). Tedpfoz Aiwbjx Ahasd Technical Information: Model year: 2019 Model: MEG RS 650.1.3250.6.406.34 Machine height: 7,835 mm Machine width: 3,975 mm Machine depth: 1,711 mm Number of carriers: 34 Number of shelves: 9 Maximum carrier height: 348 Carrier width: 3250 Carrier depth: 628 Electronics: 3/N/PE 400V, 20A

Condition: used, Year of construction: 2014, total height: 6,550 mm, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: Logicontrol, with colour Touchscreen display Serial No.: 14001667/002 Year of construction: 2014 Load per tray: Medium X Typ2: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 6550 mm (Kardex height is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Typ2: 460 kg each, evenly distributed, more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 x 6550 mm - Footprint of the system approx.: 10.39 m2 - Capacity with 32 trays: approx. 84 m2, each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid Tjdszuvt Topfx Ahaod - An access opening with sliding doors to protect people and stored goods - Logicontrol, with colour Touchscreen display - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking Price: upon request, only via email Price: excl. VAT, including transport, installation, and warranty Delivery time: in stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades in and stocks mainly used Kardex Remstar VLM automatic lift and rotating warehouse systems. Please visit our website for the current stock. We install and/or dismantle these systems in a safe manner with VCA-certified technicians, and we have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 1993, Hänel Tjdpjzy R Ipefx Ahasd Type: Rotomat 970 Device No.: 61458/1-2 Year of manufacture: 1993 Device height: approx. 4360 mm Device width: approx. 3420 mm Device depth: approx. 1250 mm + 300 mm tabletop Number of shelves: 29 Shelf width: approx. 2930 mm Shelf depth: approx. 445 mm Shelf height: approx. 230 mm Load per shelf: 161 kg Total load: 4,669 kg Color: beige/blue

Condition: used, Year of construction: 1993, Hänel Type: Rotomat 970 Device No.: 61458/1-2 Year of manufacture: 1993 Device height: approx. 4360 mm Device width: approx. 3420 mm Device depth: approx. 1250 mm + 300 mm tabletop Number of shelves: 29 Shelf width: approx. 2930 mm Shelf depth: approx. 445 mm Shelf height: approx. 230 mm Load per shelf: 161 kg Total load: 4,669 kg Tedpfxjzy R Iis Ahasd Color: beige/blue

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 2 units SSI Schäfer LogiMat-2425 from 2019 for sale. Very sparsely used and in as good as new condition. SSI Schaefer is one of the world's largest companies in warehouse automation and their Vertical Lift Module "LogiMat" has gained a lot of ground in the world in recent years. These 2 lifts come with a good height of 9 950 mm - if you have enough ceiling height in your warehouse or factory, it means the possibility of really compact storage on a small floor surface. If necessary, the machines can be lowered to the desired height. The trays have a width of 2 425 mm and can handle a load of 300 kg, the combination means that the vertical storage lifts also work for businesses with heavy goods. The VLM's come with the option "LogiTilt", a function where the shelf can tilt in the opening of the machine and thus improve the ergonomics for the picker. In addition to the tilt function, the lifts also come with a laser pointer. If the machines are connected to your ERP or WMS, the laser pointer can indicate which picking location goods should be picked from. The machines can be purchased separately or in pairs. Available with a delivery time of 4-6 weeks. Shipping and installation is additional. These vertical lifts are configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. The Vertical Lift Modules are each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. Todpfxsy D St Rs Ahaod These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. The items can be purchased separately or in packages of 2 or 3. Available from the end of October 2023. Shipping and installation not included. Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Depth vertical lift module / tray: 2 712 mm / 625 mm Number of trays: 34 trays per unit Maximum weight per tray: 200 kg Electronics: 25 A, 400 V

Condition: good (used), Lifting system, Megamat, 170 kg / tray, approx. 6 m high, – used - : Price ex location: €14,500 (net), plus dismantling, etc. Manufacturer: Megamat Model: Megalift 14448/25/6010 Year of manufacture: 2000 Max. load capacity per tray: 170 kg Tjdpfsyhxkmex Ahaod Max. total load capacity: 18,000 kg Dimensions per tray: approx. 2.45 m x approx. 0.80 m Number of trays: approx. 40 units Machine dimensions: Height: approx. 6.01 m Width: 2.76 m Depth: approx. 2.70 m 3/N/PE 230/400V 10A, fuse 16A Condition: good Availability: immediately Location: BG-8800 Sliven

Condition: used, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: Logicontrol, with colour Touchscreen display Serial No.: 14001666/001 Year of construction: 2014 Load per tray: Medium X Typ2: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 6050 mm (Kardex height is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid subject to the system being unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg Tedpfxjzuvxvs Ahasd - Maximum tray capacity: 32 trays Medium X Typ2: 460 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 x 6050 mm - Footprint of the system approx.: 10.39 m2 - Capacity with 32 trays: approx. 84 m2; each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Logicontrol, with colour Touchscreen display - LED anti-glare lighting above the access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking Price: upon request, only via email Price: excl. VAT, including transport, installation and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades in and stocks mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for current stock. We install and/or disassemble these systems in a safe manner with VCA-certified technicians, and we have been doing so for over 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands