Used working platform trailers for sale (69)

Condition: new, empty load weight: 4,400 kg, maximum load weight: 19,600 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, suspension: air, tire size: 235/75 R17,5, wheelbase: 8,795 mm, Equipment: ABS, | Krone AD Jumbo Flatbed Trailer 3-Axle New | Multilock outer frame along the entire length | Air suspension front and rear (raise/lower) | Turntable with ball bearing slewing ring, low-maintenance | 40 mm drawbar eye | BPW axles with drum brakes | Spare wheel holder | Dimensions (L x W x H): 8.60 x 2.48 x 0.93 m | Steel front wall 1.60 m | Wheelbase: 8,795 mm | Tyres 12x front/rear: 235/75 R 17.5 | Subject to error, change and prior sale. Csdpoy H Ilzsfx Afaeri

Condition: new, overall weight: 3,500 kg, loading space length: 6,200 mm, loading space width: 2,100 mm, tire size: 13, Year of construction: 2025, ANHÄNGERWIRTZ, your go-to place for new trailers, offers high-quality brand-name products! Cjdpfx Afszdyd Usasri Over 850 new trailers in stock. Over 130 used trailers constantly available. Non-binding example: Variant machine transporter Variant multi-purpose transporter 3563 UX, 620x210x30cm, 3800kg, braked tandem axle, high-sided platform with low chassis, 13" wheels, tilting flatbed with manual hydraulics, 30cm folding aluminum side panels, continuous loading flap 90cm high with lifting aid, DIN lashing eyes in the chassis frame, automatic support wheel, modern LED lighting... And available in various lengths and configurations. Trailershop offers you the unique Roadster at a fair price with short-term availability. New vehicle, invoice with VAT, warranty from an authorized dealer with 35 years of experience. Copyright on images, text, and logos 06.2026 VDK-3563UX30BLACK

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * GIGANT axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display option in the truck via EBS signal—no truck-side installation required) * LED lighting system * 15-pin power connector ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox mounted on the front wall, right-hand side * Side underrun protection * Plastic quarter mudguards ----Lowbed platform: * 50 mm softwood floor * Preparation for subsequent installation of 20" container locks at the front and rear * Bolted front wall, smooth sheet steel * Drop sides made of trapezoidal-profile sheet steel, foldable with sideboard spring assist * Bolted, hot-dip galvanized rear stakes ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * One 6.3 t lashing point at each front and rear corner * Various holes in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles; storage compartment underneath the loading platform integrated in the chassis for rear access Crjdpfspk D Dqox Afaoi ----Paintwork: * Chassis, drawbar, front wall, and rear wall hot-dip galvanized * Entire vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 16,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, * T3 Profile 30.0 ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via coil spring & locking pin ----Electrical system / Lighting: * SmartBoard as an information tool on the trailer with pressure sensors for displaying pressure for total axle load per axle group * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Side marker lights with turn signal control * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General components: * Side underrun protection * Mechanically adjustable warning sign packages at the front and rear * Front axle, closed plastic mudguards, as well as rear, straight galvanized steel splash guards, each with splash protection * Folding cover (hot-dip galvanized) for the tool box in the turntable platform * Tool box made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), on the right side ----Low-bed platform: * 4 lashing pockets on each side, with simultaneous 2-ton lashing capability * Rubber covering on the folding ramps as well as on the approach ramp on the left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from the front to the end beam * Hardwood flooring on the running surfaces of the low-bed platform * Log support under the loading area in the longitudinal direction * Roller stop in front of the front beam, raised with 1 x 6.4-ton lashing eye on each side ----Load securing package (consisting of): * 5 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and recessed in the outer frame - 13.4 tons in the corners, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) ----Ramps: * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load holding valves * Hydraulic side ramp adjustment ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump capacity in the truck of over 40 liters to max. 140 liters / min.) * Hydraulic control block, splash-proof * Two-line hydraulic system ----Rear support: * Rear support, hydraulic (single-stage cylinder) ----Loading area dimensions: * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach ramp) * Loading height loaded approx. 890 mm +/- 20 mm air suspension ----Paint finish: Codpjq Dyvcsfx Afaeri * Chassis, turntable, roller stop, folding extensions & approach ramps hot-dip galvanized. * Axles, turntable, drawbar, air tank, etc. painted in black. ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 19,470 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,500 mm, loading space height: 930 mm, Year of construction: 2026, Equipment: ABS, Now immediately available!!!!! JUMBO PLATFORM TRAILER KRONE 3-axle ADP 27/ zLNT4 BS / MULTILOCK/8600 mm/BPW Manufacturer: KRONE Registration date: NEW VEHICLE Dimensions: 8600 x 2480 x 930 Permissible total weight: 24000 kg Crodsy U R T Rspfx Afaei Unladen weight: 4420 kg Payload: 19580 kg Air suspension, raise/lower function Drum brakes Spare wheel holder ABS EBS Axle manufacturer: BPW ECO Screen-printed floor Tie-down points Toolbox Paintwork, body: black Paintwork, chassis: black Tires: 12 Tire condition: 100% Tires, front axle: 235/75 R 17.5 Tires, rear axle: 235/75 R 17.5 MULTILOCK OUTER FRAME along the entire length BPW eco drum brake, 3 x 9000 kg axle RETRACTABLE DRAWBAR 2000 - 2400 mm Air suspension, raise/lower function, front and rear Technically, maximum permissible total weight of 27000 kg ABS/EBS system 30 mm screen-printed floor Forklift-compatible with 5460 kg axle load STEEL FRONT WALL 1200 mm high Wheelbase 8545 mm / axle distance 2nd - 3rd axle: 1310 mm Overall length 10390 mm 880 mm lowered All information without guarantee, subject to prior sale!! If you have any questions about this or other vehicles, please call us.

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, T3 Profi 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) Crjdpfx Afel Tpwyeaoi * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 to BPW Eco axles ----Suspension: * Air suspension with raising and lowering function, controlled by an RtR valve ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Smart-Board as an information tool * LED tail lights 12/24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General components: * Lateral underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic fenders, rear axle: straight, galvanized steel mudguards, each with splash protection * Reflective contour strips on the sides and rear * Folding cover (hot-dip galvanized) for the tool box in the turntable platform ----Low-bed platform: * 4 lashing points on each side with simultaneous 2 to lashing capacity * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards stored in the center of the loading area * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the sides ----Load securing (La-Si package): * 2 lashing points (6.4 to) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowering, loadable in all directions and embedded in the outer frame - in the corners 13.4 to, otherwise 10 to. ----Excavator arm rest: * Over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 to lashing rings on the sides in the excavator arm rest) ----Loading area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) ----Loading height: * Unloaded approx. 1,070 mm * Loaded approx. 910 mm ----Tires: * 235/75 R 17.5 ----Paint finish: * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tank, etc. painted in a black shade ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available for immediate delivery from Egestorf, near the A7 motorway

Condition: new, maximum load weight: 20,500 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 9-ton BPW Eco axles * 1st axle liftable Credpfxjr Dpzxs Afaoi * Last axle as a trailing steering axle with electropneumatic steering lock via PIN reverse gear (locking of the trailing axle from the tractor for maneuvering purposes - without installation on the truck side - activated on PIN 10 in the 15-pin connector, only for maneuvering purposes, not for use on public roads) ----Suspension: * Air suspension with lifting and lowering system with RTR function ----Electrical System / Lighting: * SmartBoard control box as an information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck side * 15-pin power connector * LED rear lights * LED rotating beacon (removable) incl. bracket and installation * 2 x LED reversing lights on the vehicle rear (switched via reverse gear) * Flashing LED side marker lights ----Drawbar / Flange Coupling: * Fixed center drawbar with 50 mm flange coupling (laden 900 mm, mm height adjustment at the headplate) ----General Components: * Mech. front support winch, mech. pivoting supports at the rear of the chassis * Mech. adjustable warning sign package at the front and rear * Toolboxes made of galvanized sheet steel - black powder coated - approx. 650 x 300 x 600 mm on the right side ----Loading Platform: * Side walls continuous (without center rail) up to the access ramp * Folding rear rails * Steel rear panel inserted in front of the rear rails * 60 mm larch/Douglas fir wood floor * 400 mm steel front panel, plug-in ----Load Securing: * Perforated outer frame approx. 45 degrees angled with device for mounting 3-ton lashing eyes * 1 x 10-ton lashing eye in each corner, as well as additionally 2 x 10-ton and 3 x 6.3-ton lashing eyes on each side * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * Hydr. single-piece access ramp approx. 3,000 x 720 mm, mech. adjustable on the side * 4-way hydr. control block for possible retrofitting of the hydraulic ramp adjustment ----Hydraulics: * Hydr. flow divider in the trailer (with hydraulic pump capacity in the truck of over 40 ltr to 120 ltr/min) ----Painting: * Chassis, drawbar, front panel, mech. rear support struts, access ramps, tailgate hot-dip galvanized * Axles, air tank, flange coupling and front support winch painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: Available for immediate delivery from Egestorf

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Year of construction: 2026, Equipment: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container ----Technical Specifications * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles * Tyres: 235/75 R17.5, twin tyres * Air suspension: fitted * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ----Chassis / Superstructure * Platform trailer with twistlocks for containers * Multiple container locking systems (fixed + extendable) * 6 pairs of lashing points integrated into the outer frame * Additional lashing points under crossmembers * Robust outer frame with lashing holes * 27 mm anti-slip birch plywood floor * Galvanised omega-profile crossmembers * Max. crossmember spacing: 400 mm ----Brakes / Safety * EBS braking system (Knorr or Wabco) * ABS / Roll Stability Program * Dual-circuit air brake system * Basic tyre pressure monitoring system Codey Euffopfx Afajri * 2 air tanks (each approx. 80 L) ----Equipment * Complete LED lighting system * Lateral LED marker lights (flashing) * 15-pin electrics * Rear underrun protection * Side underrun protection * Plastic mudguards (180°) * Mud flaps with “WIESE” logo * Rear access ladder (foldable & extendable) * Rear impact buffers ----Towing Equipment * 18 t drawbar (fixed & extendable) * 40 mm towing eye * Turntable with ball bearing slewing ring * Height adjustment available ----Miscellaneous * TÜV approval available * Fully hot-dip galvanised chassis * High-quality steel construction * Made in Germany For further information, please do not hesitate to contact us.

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11-ton Gigant axles * Liftable center axle ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm drawbar eye and height adjustment mechanism ----Electrical System / Lighting: * LED tail lights * 15-pole electrical connector * TPMS (Tire Pressure Monitoring System) ----General Components: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 x D: 450 mm) * Lateral underrun protection * Plastic quarter fenders with splash guard * Plastic impact protection buffer at the rear * Mechanical support legs at the rear ----Container / Low-Loader Platform: * Hot-dip galvanized main frame with raised outer frames (approx. 25 mm higher) for guiding roll containers * Steel sheet floor with recesses for rollers in the bogie area * When transporting roll-off containers, a container length of 5,500 - 7,000 mm is possible * Pneumatic 4-way clamp locking system as well as mechanical plug-in stop angles at the front in the track * Load securing certificate according to DIN 30722-1 * Transport of up to 2 demountable containers with a maximum volume of 10 m³ is possible * Includes 8 repositionable bin stops for lateral centering of the bins; the front 4 bin stops are plugged in and have a pivoting stop ----Load Securing: * 3 pairs of 10-ton TÜV-approved lashing rings on the side for attaching tensioning elements for positive and frictional securing of the bins * 4 lashing straps in a cloverleaf design (side) and 1 pair of 13.4-ton TÜV-approved lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welding bead as an anti-slip coating in the track area of the access ramp * 1 pair of aluminum loading ramps (16 tons / pair) 2,800 x 400 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Tires: * Tires: 235/75 R17.5 ----Riding Height: * Riding height when loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paint Finish: * Reflective contour tape on the side and rear * Axles, turntable, drawbar, and air tank painted in a black tone * Hot-dip galvanized main frame Cedpfxjpk D Awj Afasri ----Information: * A permissible total weight of 27,000 kg is technically possible * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 22,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2026, * PT 30 Profile: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system, and quick-release valve ----Drawbar: * 1,200 mm long drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical system / Lighting: * Smart board mounted on the trailer as an information tool (for axle load display – separate display for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear ----General components: * Lateral impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fenders with splash protection * Rear straight, galvanized steel mudguards with splash protection * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, on the right side * Box in the turntable for accessories with hinged lid, 2 continuous locking mechanisms, permanently installed (directly behind the turntable platform) * 2 galvanized steps on the turntable, left + right ----Low-loader platform: * Robot-welded, anti-slip surface on the steel plate of the turntable platform (protruding weld beads) ----Load securing (load securing package consisting of): * 2 lashing points (13.4 tons) at the front, left & right on the front wall support * 1 pair of UVV lashing rings (13.4 tons) at the front & rear, as well as 3 pairs of UVV lashing rings (10 tons) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame * 3 lashing pockets on each side with simultaneous 2-ton lashing capacity * Profifix lashing rail in the longitudinal axis, in the center, in the level area for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 m (however, not in the rear slope) Crjdpfetplwijx Afaji * Widening planks stored in the center of the loading area ----Ramps: * Hydr. one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable on the side * Control block, 4-way, for later retrofitting of hydraulic ramp adjustment ----Excavator arm rest: * Excavator arm rest extending across the rear axle to the end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing points LC 6400 daN in the excavator arm rest on the side in the longitudinal frame ----Loading height: * Laden approx. 910 mm +/- 20 mm, air suspension ----Paint: * Chassis, turntable, folding outriggers, support legs, and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle steerable (locking of trailing axle can be performed from the cab for maneuvering purposes, without installation on the truck side, as well as additionally by switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Plastic wheel arches front axle and galvanized steel sheet mudguards on rear axle ----Low Loader Platform: * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortened low bed platform by 500 mm to 6,280 mm including extended stepped transition 500 mm forwards * Rubber covering on foldable frame, approach slope, and on the running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick holder ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV-compliant lashing points each at the front and rear side corners * 5 x 10 t UVV-compliant lashing rings per side (swiveling and lowerable, loadable in all directions) * 4 stake pockets per side, also 2 t lashing capability * 1 x 16 t UVV-compliant lashing point on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m overall width (board bracket holder under chassis, right side) ----Excavator Stick Holder: * Continuous excavator stick holder with reinforced profile from last axle to end beam, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV-compliant lashing rings on the sides of the stick holder ----Ramps: * Hydraulic folding ramp with double-acting hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs in the truck above 40 l/min, max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm (via air suspension) ----Loading Area Dimensions: * Deck above turntable: 2,600 + 390 x 2,520 mm * Low bed area: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, bogie, drawbar, extension consoles, access ramps hot-dip galvanized * Towing fork, axles, hydraulic axle supports, as well as air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available* Cjdpfx Afjxptn Djajri

Condition: used, Year of construction: 2023, Lifting height ca. 4.500 mm weight 1065 kg battery 24.0 V electric work platform like NEW with only about 10 operating hours (!!) Equipment: - mobile electric scissor work platform - for working at great heights Cedpfxsxacf He Afajri - quick and effortless access to higher work areas - large work surface - electro-hydraulic lifting height adjustment (infinitely variable) - operation of the chassis + lifting frame effortlessly using a joystick * alternatively from the ground - chassis offers high mobility and stability - charging cable included in delivery

Condition: new, maximum load weight: 2,110 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, loading space height: 200 mm, B27300/150 MACHINE TRANSPORTER TECHNICAL DATA * Trailer type B27300/150 * Total weight 2700kg * Payload 2075kg * Internal dimensions L: 305cm, W: 155cm, H: 20cm * Loading height approx. 54 cm * Floor multiplex wooden floor * Lashing points recessed in the loading floor * Side walls steel * Frame welded steel, hot-dip galvanized * Electrics 13-pin, 12V * Tires 185R14C * Axle manufacturer AL-KO or KNOTT * Number of axles 2 * Braked axle * Support wheel as standard * Walkable steel fenders * Shovel storage * Rear supports * Loading ramps - 200 cm plus vehicle registration document/ COC certificate 39.00 ¤ All prices include VAT. Images do not have to correspond to the standard equipment, technical changes (e.g. tire sizes) are subject to change. Delivery: Delivery by freight forwarder possible, per transport kilometer ¤ 1.50 throughout Germany one way (Seesen to destination) at least 270¤ plus VAT Visit us at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=. You can also get your desired trailer and accessories here by arrangement: B L Y S S transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. Credsthlrhspfx Afaoi ?FINANCE OR LEASING POSSIBLE* Vehicle number (for customer inquiries) Images do not necessarily correspond to the standard equipment, technical changes (e.g. tire sizes) are subject to change.

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, Year of construction: 2026, * T 4: * EBS * Emergency release system for spring accumulators * Drum brakes * 4 x 11 to. Gigant axles * Parabolic springs * Mech. axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation * Warning sign packages front & rear * Reflective contour striping on the sides and rear * EBS multi-voltage system for 12 & 24 V electrical systems * LED rotating beacon (removable) at the rear * 24 V - 15-pin and additionally 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm drawbar eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in body design, located on the right side * Front, closed, plastic single mudguards * Rear, straight steel mud flaps each with splash protection (spray mist suppression) * Side underrun protection * Extended offset crank extended by 500 mm to the front * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Floor over the turntable platform made of 50 mm and in the low-bed platform made of 60 mm needle wood * Outer planks of the ramps made of 50 mm bamboo wood * 4 pocket sleeves on each side (but no stanchions present) with simultaneous 2 to. lashing capability * Lasi package consisting of: 2 lashing eyes 6.4 to. at the front left and right on the main frame of the turntable platform, 1 pair of 13.4 to. lashing rings on the outer frame on the front and rear sides, and 4 pairs of 10 to. lashing rings on each side, pivotable and lowerable, loadable in all directions and embedded in the outer frame, 2 pairs of lashing rings 6.4 to. on each side in the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (but not in the rear slope) * Extension planks stored on the left side in a storage compartment * Excavator arm rest above the rear axle to the end of the approach ramp approx. 2,300 x 740 x 190 mm Csdorczm Djpfx Afajri * Mech. support legs at the rear * Hydr. hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydr. lateral ramp displacement on sliding tube from the ramp shaft * Loading area above the slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (incl. 860 mm approach ramp) * Chassis, turntable, ramps, mech. folding supports at the rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available from Egestorf

Condition: new, machine/vehicle number: AHW BJT DP2700, empty load weight: 505 kg, maximum load weight: 2,195 kg, overall weight: 2,700 kg, loading space length: 2,800 mm, loading space width: 1,300 mm, Immediately available for transporting stage equipment or mini excavators. Machine transporter, cargo digger, plant trailer 2. Dimensions: 280x130x15cm, weight 2,700kg. Model with LED lighting. Tandem low-loader with chassis – inertia brake – tires 14" – loading platform height 38cm – galvanized steel body with perforated steel floor, DIN lashing eyes – shovel holder mounted – steel ramps, foldable and adjustable, support wheel. Crsdpozm Rigjfx Afaoi Schedule a pick-up appointment now by calling 02182 699 0 690, Monday to Friday. 07.26 / 543-0110 VERSION 29002

Condition: new, maximum load weight: 2,750 kg, overall weight: 3,500 kg, ANHÄNGERWIRTZ, your pick-up market for new trailers, offers strong, well-known brands at affordable prices, directly from the manufacturer! Over 800 new trailers in stock. Over 130 used trailers constantly available. Non-binding example: while supplies last! Cjdpszm Rd Refx Afaori Machine transporter Cargo Digger Plant 543-3717-35-2-12, 370x170x15cm, 3500kg. Tandem low-loader V chassis - inertia braking system - 12" tires - loading platform height 38cm - galvanized steel trough with perforated steel floor, DIN tie-down eyes - shovel holder mounted - full-width steel loading ramp, foldable, and support bracket with lifting aid, spare wheel, lockable ball hitch, reinforced support wheel... Sales around the clock via our online shop at trailershop. Sales via telephone order: Mon. - Fri. 08:00 - 12:30 and 14:00 - 18:00. Or around the clock via our online shop at trailershop.de. Content and images are subject to copyright - logos are trademark protected. 07/26

Condition: new, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 3,750 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Exhibition Trailer Event Promotion HBA375 Please use 0566 for inquiries.* Permissible total weight: 1,500 kg * Internal dimensions: 375x220x230 cm * Chassis: single-axle high loader, steel/galvanized with 4 extendable support legs * Tires: 10 inch * Reverse-automated brake and jockey wheel * 13-pin plug connector * Body: white, UV-resistant polyester sandwich panels, white painted profile strips * Walls and ceiling approx. 25 mm thick * Full-length fold-down flap on the right in the direction of travel * Folding aluminum steps with insertable handrails/railings on both sides; flag holders included Additional €39 gross for vehicle documents/COC. We will send these by registered mail after receiving a (down) payment or hand them over to you in person. Crjdpfx Afjxw Dt Tsaji Please arrange a viewing in advance, as this vehicle may be sold despite our large stock on site. You can call us to check if your desired trailer is available immediately—we are also happy to order new trailers with different details (dimensions, weight, equipment, etc.) to your specifications. Due to the large number of trailers in stock, errors may occur from time to time—please bear with us. All details and prices subject to error.

Condition: new, maximum load weight: 37,390 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: Credpfx Afsq Euakeasi * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes engaged on the first axle via EBS (without truck-side installation) * Rear axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes via EBS from the driver's cab (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering device as well as Ride-on-Road (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, equipped with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 7-pin socket on the rear side for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with in-cab display via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support winches at the front and swivel supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from truck to semi-trailer ----Low Loader Deck: * 2nd king pin position * Fifth wheel platform with front corners chamfered at 45° and front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high drop-side aluminum boards (RAL color of choice) on the sides of the fifth wheel platform, foldable and removable * Rear board inserted 150 mm high * Rear slope on the fifth wheel platform leading to the drop deck approximately 700 mm long with chequer plate covering, and at the end, a perforated strip for attaching aluminum loading ramps * Fifth wheel platform with 50 mm clamped timber planks and drop deck platform with 60 mm clamped timber planks * Chequer plate above the axles * 9 mechanical folding deck wideners up to 3 m overall width, except on the rear slope (widening planks included, stored in a transverse compartment underneath the loading area) * 3 mounting recesses under the fifth wheel platform for storing either aluminum loading ramps or timber planks for wheel recess covers ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled 45°, with hole pattern for lashings (2 t lashing capacity per lashing point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Drop Deck Platform: * 3 x 13.4 t lashing rings per side on outer frame (1 x at the start of the fifth wheel platform step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforcement profile approx. W = 770 mm x rear d

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering device and RtR valve * SmarD on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at the rear * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel and spare wheel holder in basket design, mounted on the right side * Enclosed plastic single fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. cover, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood * 4 stake pockets on each side (no stakes included) with simultaneous 2 t lashing point per pocket * Load securing package consisting of: 2 lashing points 6.4 t at the front left and right on the main frame of the turntable platform * 2 pairs of 13.4 t lashing rings each at the outer frame front and rear, as well as 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm rest area * 8 pairs of galvanized swing-out marker boards for 3 m total width (not at the rear slope) Crjdpjl Tik Nofx Afasi * Widening planks stored in a compartment on the left side * Excavator arm rest above rear axle up to end of approach ramp approx. 2,100 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically adjustable tip, approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting and load-holding valve * Loading area across the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, turntable, access ramps, flip-out marker boards and mechanical drop-down supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7