Used grain storage equipment for sale (5)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass or a drying container with an air volume you set yourself, instead of running a fan flat out and paying for it. This Karl Barth AG Ventomat SE-1-100-4p was bought in December 2025 and used for only approx. four months. It runs perfectly and comes as a complete working setup, not just the fan: factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reduction, plus a free 10m Ø400mm fabric hose. New purchase price approx. CHF 8,507. Only one available - sold as one complete set with the inverter, ducting accessories and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers and agricultural ventilation where you want to control air volume rather than run flat out. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specs mean in practice: • 5.5 kW motor, 4 kW rated fan output - sized for continuous hay/biomass drying, not short bursts Csdpfx Aljzrzizsgohd • Factory-configured Invertek Optidrive E3 inverter - set air volume to the crop and its moisture, cutting energy use • Inverter in IP66/NEMA4X with disconnect switch - mounts in a dusty barn without a separate control cabinet • Duct cone 222/563 to D400mm and D750/D600mm reduction - connects to existing ducting, no custom fabrication • 10m Ø400mm flexible fabric hose included - place the fan where it fits, duct air where needed • Painted sheet metal, single-suction Swiss build (Karl Barth AG) - serviceable and supported locally Complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reduction D750/D600 with flange ring, and a 10m Ø400mm fabric hose at no extra charge. Buying/configuring the inverter alone is a substantial separate cost. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP – Duct connection: 222/563mm to D400mm, plus D750/D600mm reduction Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 incl. VAT. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). Buy with confidence: purchased Dec 2025, used ~4 months for hay drying/drying container, technically flawless. Inverter can be demonstrated running under load; nameplate photos and a running video available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as one complete set - fan, inverter, cone, reduction and hose stay together. Once sold, this configuration won't return at this price. Discount if you're quick: if you buy it till 31.10.2026, we give you a 500CHF discount on the price. Action: send your intended application, required capacity and destination - we'll confirm suitability and a transport estimate.

Condition: new, High-pressure variable-displacement axial piston pump for open-circuit industrial hydraulic systems. This pump, with a displacement of 250 cm³/rev, has an integrated power controller that automatically adjusts the oil flow according to the load and protects the motor from overload. Steel. Csdpj Afdt Hefx Algshd

Condition: new, Description The GX-100 grain press is designed for crushing grains, legumes, and feed for agricultural livestock. It is intended for use in small agricultural operations. The press features a durable yet simple design, which contributes to the device’s long service life and ease of use. It is equipped with a feed hopper and an additional blocking mechanism, allowing for adjustment of the feed rate of the crushed material. Two steel crushing rollers ensure high efficiency and reliability. A three-phase electric motor with a power of 3 kW provides the drive. The drive is transmitted to the crushing drums via 2 V-belts. Technical Data Weight 160 kg Induction motor 3 kW Power supply Chsdpfxo Abpu Is Algsd 3-phase, 400V, 50Hz Dimensions of the hopper (top) 720 mm / 685 mm Dimensions of the feed gap 95 / 18 mm Number of crushing rollers 2 Width of crushing rollers 100 mm Diameter of crushing rollers 140 mm Overall height 1320 mm Overall width 810 mm Overall length 1060 mm

Condition: new, Description The GX-100 grain crusher is designed for crushing grains, legumes, and feed for agricultural livestock. It is intended for use in small agricultural operations. The crusher has a durable yet simple design, which contributes to the device’s long service life and ease of use. It is equipped with a feed hopper and an additional blocking mechanism, allowing you to adjust the feed rate of the crushed material. Two steel crushing rollers ensure high efficiency and reliability. A three-phase electric motor with a power of 3 kW provides the drive. The power is transmitted to the crushing drums via 2 V-belts. Technical data Weight 160 kg Induction motor 3 kW Power supply 3-phase, CEE 400 V, 50 Hz Dimensions of the hopper at the top 720 mm / 685 mm Dimensions of the feed gap 95 / 18 mm Number of crushing rollers 2 pcs Chsdpfx Ale Abpuzsgjd Width of the crushing rollers 100 mm Diameter of the crushing rollers 140 mm External height 1320 mm External width 810 mm External length 1060 mm

Condition: new, Grain Crusher GX-200 NEW (new model with increased performance) The GX-200 NEW grain crusher is designed for crushing grains of all types, as well as legumes, for the production of animal feed. It is primarily used in small agricultural operations. The crusher features a robust, stable frame that rests on adjustable rubber feet. The hopper, with a capacity of 110 liters, is equipped with an adjustable slide gate that feeds the grain into the crushing mechanism. The gap width between the rollers can be adjusted tool-free via an eccentric – in contrast to the previous version, which required tools. The design of the crusher is optimized for durability, efficiency, and ergonomics, and allows for quick adjustment of the roller gap in the range of 0 to 5 mm – depending on the type of grain. The drive is provided by a 7.5 kW motor, which transmits power to both crushing rollers via three V-belts. Iron contaminants that may be present in the grain are filtered out by a special set of neodymium magnets. The machine is equipped with a folding bagging device and a pivoting discharge chute, which facilitate the collection of the crushed grain. Regular lubrication of the roller bearings, which are mounted in cast housings and installed in a welded machine body, ensures trouble-free operation. Performance of the GX-200 NEW crusher: Wheat: up to 1250 kg/h Barley: up to 800 kg/h Corn: up to 1000 kg/h Technical specifications Weight: 250 kg Induction motor: 7.5 kW / 400 V CEE / 50 Hz Dimensions of the hopper top: 790 x 865 mm Dimensions of the filling gap: 260 x 40 mm Number of crushing rollers: 2 pcs Cedpfx Ale Ab Srcogshd Width of the crushing rollers: 270 mm Diameter of the crushing rollers: 240 mm Height: 1520 mm Width: 800 mm Length: 1200 mm