Tree holding plate light, Portable winch – 1 piece

Portable Winch

Condition: new, New product! Available from July 2024 - Pre-order now! PCW4500 - 2-stroke gasoline-powered portable winch Equipped with the CER500W engine from Maruyama, a commercial 2-stroke engine for professional use, offering an impressive pulling force of 1,200 kg. The STRONGEST winch from Portable Winch! The very first model with a 2-stroke engine in the product line. The Maruyama engine, with its 5-year warranty, makes it the most reliable on the market. With an incredible direct pulling force of 1,200 kg (2,650 lb) and a maximum pulling force of up to 6,000 kg (13,250 lb) when using 2 double pulleys. Equipped with a unique stainless steel cable brake (progressive capture system) that holds the load in place, a centrifugal clutch ensures better control, a protective plate adjusts to the foot when starting, and the pull bar on the swivel hook prevents the cable from tangling. The PCW4500 was designed for professional users who want to be convinced by the easy operation and safety of the device. - 2-stroke commercial quality engine from Maruyama Japan - Centrifugal clutch and stainless steel cable brake - Fuel: the same gasoline-oil mixture as for a chainsaw (see manual for more details) - Drum size: 76 mm *Note: The cable brake of the PCW4500 cannot be installed on any other winch. The device was specially developed for this model to facilitate the starting of the 2-stroke engine and to integrate the throttle and clutch control, which is not possible with direct-drive winches. DIRECT PULLING FORCE 1,200 KG DOUBLE PULLING FORCE (when using a block and tackle pulley) 2,400 KG WEIGHT 13 KG SPEED 12.2 m/min ENGINE MARUYAMA CER500W - 50cc, air-cooled 2-stroke gasoline engine, 360° tiltable GEARBOX Gearbox made of alloyed aluminum. Heat-treated 3-stage spur gear. Shafts with ball bearings. Oil bath lubrication GEAR RATIO 200:1 CLUTCH Type: Centrifugal clutch BRAKE Operation with: automatic quick-release retaining brake Bsde Adh Ixspfx Aizjww Roller bearing with backstop DIMENSIONS 43 cm x 33 cm x 29 cm DRUM Ø 76 mm CABLE RECOMMENDED Low-stretch double-braided polyester Length: Unlimited Minimum diameter: 10 mm Maximum diameter: 12 mm INCLUDED: Polyester sling 60 mm x 2.5 m

Condition: new, Description Enhance your winch with the Portable Winch Accessory Set for hunting winches and be perfectly equipped for hunting and off-road adventures. The set includes: Bodj Adh E Ropfx Aizoww 1x PCA-1290: Drag chain for logs, max. diameter 50 cm 1x PCA-1295: Choker chain, 6 mm x 2 m, with C-hook and clevis 1x PCA-1260: Polyester sling, 60 mm x 2 m, MBS 2180 kg 1x PCA-1282: Safety hook with locking mechanism and three chain links 1x PCA-1276: Oval steel snap hook, MBS 25 kN 1x PCA-1274: Stainless steel pulley, 90 kN MBS, for 6-13 mm ropes

Condition: new, Description The 6-piece portable winch forestry accessory kit is the ideal complement to your winch for forestry work. It contains everything you need to carry out your tasks efficiently and safely. The kit includes: 1x PCA-1295: Choker chain 6mm x 2m, with C-hook and pin 1x PCA-1290: Log dragging tool for logs up to 50 cm in diameter 1x PCA-1260: Polyester sling 60 mm x 2 m, with a minimum breaking strength (MBS) of 2180 kg Bwsdpfx Aj Adh E Dsizjw 1x PCA-1282: Parallel hook with safety latch and 3 chain links 1x PCA-1276: Oval steel snap hook, MBS 25 kN 1x PCA-1274: Stainless steel pulley, 90 kN MBS, for 6-13 mm ropes

Condition: new, The towing shell prevents logs from getting stuck on roots, stumps, or fallen timber. It also protects your valuable trees along the towing route from damage. The towing shell is made of high-performance polymer plastic, making it both robust and flexible. The 51 cm wide opening allows you to pull large logs as well as bundles of smaller logs or brush. - Material: Polymer - Opening: Diameter 51 cm - Length: 67 cm - Weight: 5 kg WARNING! OVERSIZED ITEM – SPECIAL SHIPPING REQUIRED AS THE OVERALL DIMENSION EXCEEDS 300 cm! Max. log diameter: 50 cm Bwjdpfe Adh Ewjx Aizsw DIMENSIONS: 51x67 cm Material: Polymer Weight: approx. 5.3 kg

Condition: new, In the case of exceptionally heavy loads, you can multiply the power of the winch by using pulleys. This double pulley, like the PCA-1274, is also made of aluminum and stainless steel, and features two aluminum rollers with a diameter of 100 mm. By using a double pulley attached to the load and a single pulley, you can triple the winch's pulling force. When using two double pulleys, the pulling force increases to 4 tons (when using the PCW5000)! Bwodpfx Ae Adh Eqeizew - Double, side-mounted pulley made of stainless steel - 2 aluminum rollers, Ø 100 mm - Breaking load: 44 kN - Weight: 2 kg

Condition: new, The double-sided, automatically locking pulley made of aluminum is specifically designed for rescue operations. It features a brake cam system that releases the rope in one direction and automatically locks it in the other. The cam spring can be deactivated by pulling on a release cord. When used with a matching double sheave pulley, the mechanical force amplification increases to four times (4:1). Both aluminum pulleys have a diameter of 62 mm and are mounted on self-lubricating bushings and axles made of stainless steel. The pivoting side covers and the main plate are also made of anodized aluminum. - MBK: 40 kN - CE and NFPA certified as personal protective equipment - for ropes from 10 mm to 13 mm - 2 pulleys Ø 62 mm - Weight: 1 kg Bwjdo Adh Ekjpfx Aizjw

Condition: new, Laterally mounted, self-locking pulley made of aluminum Bwsdo Adh Edopfx Aizow This self-locking pulley was specifically designed for rescue operations. It features a brake cam system that allows the rope to run freely in one direction and locks it in the other. The cam spring can be deactivated using a pull cord. The 60mm diameter aluminum pulley is mounted on a self-lubricating bushing and a stainless steel axle. The pivoting side covers are also made of anodized aluminum. - Breaking load: 40 kN - CE certified as personal protective equipment - for ropes from 9.5mm to 12mm - 1 pulley Ø 60mm - Weight: 600g

Condition: new, to be used with automatic sleeve PCA-1291. Bwjdpfx Ae Adh D Teizew

Condition: new, Use with the square tube (PCA-1267), the mounting kit for a trailer hitch (PCA-1266), or the tree/post support plate (PCA-1263). Bwede Adh Dyopfx Aizsw This winch support plate is ideal for attaching the winch to your vehicle or to the tree/post support. It is vibration-damped and can be rotated 45 degrees to the left/right, which stabilizes the winch and aligns it with the load. Ideal for prolonged work at the same location.

Condition: new, For use with the winch support plate (PCA-1268). The mounting kit is an attachment for European 50mm ball mounts, which is fitted onto the ball mount and securely locked in place using the lever. The winch support plate (PCA-1268) can then be attached to this. This provides a safe and stable attachment. Delivery includes adapter PCA-1265 + screws/nuts. Bwsdpfo Adh Dtsx Aizsw The winch support plate PCA-1268 is not included in the scope of delivery!